Screw Airless Filter for Paint Sprayer Gun
| Image | Specifications |
 |
Airless paint spray gun filter for Titan.
With high quality stainless steel wire mesh.
Mesh: 100, 200, 60, 30, etc.
Replaces Titan P/N 500-200-100.
Diameter: 8.9 mm.
|
Screw Airless Filter for Paint Sprayer Gun Introduction:
Essential to maintaining your finishing equipment and eliminating down time, paint spray filters will prolong the life of your high pressure hose and airless paint sprayer, while allowing you to be most efficient. Whether you require Graco airless, Wagner airless or air assisted airless filters in various mesh sizes, you can always find the right paint filters to best fit your job.
It is advised to filter your spray coating multiple times before it reaches the spray gun. The use a rock catcher, manifold filter or screen filter at the pump end will ensure no large debris gets passed through into the high pressure hose. Then once again before applying the spray coating, a spray tip filter or gun handle filter should be used to guarantee no small particles will clog your airless spray tip.
As you approach the spray gun end, a higher mesh filter should be used. If using an air assisted airless sprayer, it is recommended to use a micro filter as well, which will be placed directly behind the hose spray nozzle and allow for you to achieve the fine finish results.
| Description | Specifications |
| 150 Mesh – Red Gun Filter |
Features: Extra fine 150 mesh – Suit enamel & lacquer application.
Recommended for use with 0.013" Airless Spray Tip sizes or smaller. |
| 100 Mesh – Yellow Gun Filter |
Features: Fine 100 mesh – Suit enamel & Acrylic applications. Recommended for use with 0.013" - 0.015" Airless Spray Tip sizes. |
| 60 Mesh – White Gun Filter | Features: Medium 60 mesh – Suit Acrylic applications.
Recommended for use with 0.017" - 0.019" Airless Spray Tip sizes. |
| 30 Mesh – Green Gun Filter | Features: Coarse 60 mesh – Suit Acrylic applications.
Recommended for use with 0.019" Airless Spray Tip sizes or above. |
Advantagers of Screw Airless Filter for Paint Sprayer Gun:
1. Easy to exchange – clean filter housing
When removing the new Wagner filter all dirt collected by the filter is removed. This is achieved by filtering from the inside to the outside. Collecting all dirt inside the filter. Only filtered material is between the filter and the filter housing. Therefore the filter can be removed, even when full, very easily without sticking to the housing because of dried dirt.
2. Longer filter life time - bigger chamber for dirt
The new filter is designed to have a bigger chamber to collect more dirt. The chamber is 53% times bigger compared to the standard Airless filter. So the lifetime of the filter is extended. This reduces the downtime for filter cleaning to a minimum.
3. Easy to flush - fast colour change
No spring is needed to keep the filter in position. The dead space free filter design increases the flushablility and accelerates color change. The result is time and solvent saving.
4. Easy to mount - no wrong assembly
Due to its design the filter cannot be assembled in the wrong way, reducing the downtime to a minimum.
5. Lighter gun due to compact filter design
The size of a filter influences the size and weight of a gun. The new compact filter design supports a small and light weight gun offering a more ergonomical gun combined with a longer filter life time.
Screw Airless Filter for Paint Sprayer Gun:
Q1: How is the quality of the filters?
A: At Sinft we insist on providing our customers with the highest quality of filtration products. As a result, all of our Filters are manufactured under the most rigorous quality standards. Additionally, all of our filter elements carry six ISO Standards and we fully guarantee all of our products.
Q2: How do you guarantee the after-sale service?
A: Before shipment, our products are checked one by one. If any problems caused by the product itself, we will supply you the new replaced ones.
Q3: Do you accept OEM?
A: Yes, we have more thatn we can manufacture according to your requirement.
Q4: What’s your MOQ?
A: One piece sample is ok and more quantities, more favorable price
Q5. Can I get some samples? How could I pay the sample payment?
A: We are honored to offer you samples. We accept the sample payment via Western Union or T/T.
Q6. How long is your Delivery Time ?
A: If there is stock, the delivery time is about 5 working days after getting the payment. If no stock, 10-15 working days after the deposit.
Screw Airless Filter for Paint Sprayer Gun Services:
* Pre-sales Service: Based on the principle of constant innovation and quality guarantee, customer foremost, we are able to provide our customers the highest quality products at the most favorable price. Every customer has the chance to visit the working machine in the site before placing the order.
* During production Services: You can supervise your goods by yourself. We can offer you the Quality Supervision service by e-mail, photos, or video and update the data anytime.
* After-sales Service: Experienced technicians guidance is available on the phone, and on the internet.
Contact directly to get more information about Screw Airless Filter for Paint Sprayer Gun: