DC Current/Voltage Signal Isolated Amplifier/Converter (Photoelectric isolation)

Specification:
Specification:
-Signal Input:0-5V/0-10V0-75Mv/0-2.5V/4-20Ma/0-20mA0-1mA/0-10mA
-Signal Output:0-5V/0-10V/1-5V/4-20Ma/0-20mA/4-12-20mA
-Assistant Power Supply (VDC):5/12/15/24
-Power consumptiopn:1W
-Isolation(dc):3000
-Accuracy:0.1,0.2,0.5
-Temperature Drift:100
-Operating Temperature:-25-+70℃
-Frequency Response:≥1KHz
Application:
ISO A(U)-P-O Series using a DC signal analog modulation technique, rather than the signal carrier technology used in ISO EMA(U)-P-O Series. ISO A(U)-P-O Series has the characteristics of strong anti-electromagnetic interference and anti-high frequency signal space interference .

ISO U-P-O Series DC Voltage Signal Isolated Amplifier utilize a kind of circuitry that can convert the voltage signal to isolated current or voltage signal in proportion. Inside the IC contains a set of high-isolated DC-DC power, and voltage signal that efficient coupling switching circuit, which can convert the voltage signal to current (U/I) or voltage signal (U/U) as output directly. Higher input impedance (>1 Mom) and loading capability (Iout>650om,Vo>2Kom) makes little distortion available even after long distance transmission.

ISO A-P-O has Little input impedance (<=250ohm), higher loading capability (Iout>650ohm,Vo=>2Kohm) makes little distortion available even after long distance transmission.

To meet the requirements of 3-port 3KV isolation among the signal input, output and embedded power, the wider operating temperature range and humidity quiver, we recline on the SMT ceramic PCB, printed resistor techniques and the use of latest technology. It is available for signal to be counterchanged among 0-5V/0-10V/1-5V4-20mA/0-20Ma by connecting an exterior Gain or Zero Adj. R.
Dimension(SIP Package):32×14.2×8.9mm