Medical oxygen inhaler

The product is oxygen bridge parts are copper, not easily oxidized. This is the similar products of other products unparalleled. Tide is the finest bottles made of polyethylene, transparent, long service life. All of the above fit 10 liters of oxygen bottles . 

Technical Parameters:

Oxygen flow adjustment range 1-10L/min
Regulator pressure 0.2 ~ 0.3MPa set
Working pressure: high pressure oxygen inhaler portion of the input 12MPa-15MPa pressure, the blood pressure should be reduced to 0.2MPa-0.3MPa pressure range
After the high-pressure part of the inhaler to withstand hydrostatic test pressure reducer 22.5Mpa continued 3Min, the high-pressure part shall be no permanent deformation
Exhaust valve pressure 0.35Mpa ± 0.05Mpa, the inhaler when the output pressure of the pressure rise, the exhaust valve that is automatically
Tighten the nut thread size inhaler and oxygen cylinders connected to G5 / 8 "
Oxygen output from the external taper connector pipelines, taper joints at the outer diameter of the largest Φ9mm ± 0.5mm
The inhaler is a colorless transparent bottles tide and marked the highest, the lowest level indicator line