CG-300 Single Component Polyurethane Glue Injection Gun
Item no.: CG-300
Cartridge: one-component
Capacity: 300ml, 310ml, 330ml
Material: ABS/Reinforced Nylon frame,Stainless Steel Rod
Weight: 0.8kg / piece
Package:10pcs / carton
Inner packing: 350mm×210mm×75mm
Outer packing: 440mm×375mm×400mm
It is very important to keep the drive rod clean and to oil it frequently in order to ensure a better function.
Recover the Movement of the Piston
Symptom: Back-lash of the brake
Remedy: Turn the adjusting screw clockwise the whole way down until the drive rod can be moved back and forth.
To eliminate the back-lash, which may occur after many operations, follow the instructions below:
Turn the adjusting screw counter-clockwise until the drive rod can be exactly moved back and forth.
1, Open the swfit of handle and then pull the rack to reach the maximum.
2, Put chemical material into two-component cartridge.
3, Promote the trigger to make the chemical material come out smoothly from the cartidge
4, After using, put the rack back to the original location.5, Remove the cartridge, then to repeat the above operation.
We're the professional exporter of various caulking guns,
AB cartridges and static mixers, blowing pumps, injection pumps,plastic sleeves and
other related products all over the world, especially USA, Germany, Denmark, Russia, Singapore,
Korea, Spain, Brazil etc. Our products are widely used for glues, acrylic adhesives, silicones, sealants ,
epoxy and coating etc, and involving many sectors, like construction, waterproof, tunnel &bridge, industry,
automotive, electronic conglutination, beauty and dental .....