Specifications
Air Compressor Spray Gun1.310ml caulking gun
2.Lower noise,Smooth and uniform
3.100% delivery on time
Brief Introduction:
This air compressor spray gun is a professional caulking tool and it is designed and developed by the professional group. You can work with less force by this new model air compressor spray gun and do a wonderful work with it.
This type of air compressor spray gun is suitable for DIY and professional use, suitable for 310ml~600ml cartridge sausage glue. It is widely used in building decoration, electronic appliances, motor vehicles and parts, ships, container industries and so on.
When using the powered caulking gun , an air compressor is needed. Small air compressor is ok.
Features:
1, make the silicone sealant more smooth and uniform, save time and labour.
2, the silicone sealant flowing can be adjusted by the regulator, more intuitively, easier to understand and safer.
3, unique instant dump valve, non-drip.
4, with silencer inside, there would be very few noise.
5, streamline-designed handle, ergonomically designed and offers a comfortable feeling, easier for continuous operation.
Directions:
1, Pierce or cut off the front tip of the cartridge, remove the front cap from the applicator and insert
the cartridge into the barrel.
Tighten the front cap to provide an air-tight seal between the rear part of the cartridge and the rubber washer.(Note: Air leaks may occur if the cartridge edge is damaged).
2, Connect the air caulking gun to the air hose then connect with the gas source equipment(air compressor).
3, Adjust the air regulator to a appropriate pressure; we suggest 0.2Mpa.
4, by pulling the trigger, a cushion of the compressed air builds up inside the applicator to initiate the flow of sealant.
5, on releasing the trigger, the sealant flow ceased as the compressed air escapes rapidly with less noise at the rear part of the gun.
6, Rotate the regulator knob clockwise will increase the flow of sealant, and rotate the regulator knob anti-clockwise will reduce the flow of the sealant.
7, always disconnect the air hose after use or when replacing the air hose.
8, front caps should always be securely tightened during using to ensure safety.
9, clean up all the leftovers inside the barrel or outside the barrel after using
About Us
Our Patent
Other Series