Product Description
Vacuum Degasser for automatic fresh juice /milk/ yogurt filling machine
Product Specification
Heating and cooling system in the gas is easy to produce gas resistance, lead to partial or the whole system of poor circulation, the heating system is not hot, refrigeration system is not cold. At the same time due to the water containing oxygen and makes heating (cooling) equipment, pipes and steel radiators have oxygen corrosion, leading to perforation, leakage. In the system, the gas can also cause the corrosion of the pump, which directly affects the safety of the whole system. Vacuum degassing method is used to remove the free gas and dissolved gas in the system, so that the system can operate safely and reliably.
Technical features
1, Can greatly shorten the heating or cooling system for the first time after the initial injection of the exhaust time, is conducive to the initial commissioning of the system.
2, The removal of gas in the system, to prevent gas resistance, ensure the normal operation of the system is stable and reliable.
3, Eliminate the pump cavitation, reduce system operation noise.
4, Due to the removal of oxygen in the water, will reduce the system of oxygen corrosion, extend the use of time.
5, Due to the removal of gas in the water, the heat exchanger surface will not be accompanied by gas bubbles, improve the efficiency of heating.
6, The time and cycle of the degassing machine can be adjusted according to need.
7, A single platform for the maximum of 150 m3; can be more than two parallel use.
8, Equipment installation is convenient, automatic operation, safe and reliable, easy to maintain.
Application scope: applicable to all kinds of heating or refrigeration cycle system
Technical parameters
Vacuum degasser Function:
Removal of the liquid air (oxygen), inhibition of browning, coloring, vitamins, flavor components and other substances oxidation, to prevent quality deterioration; removing liquid adhering to the particles suspended in the gas dispersion, inhibition floating particles, maintaining a good appearance; prevent blistering when canned and high-temperature sterilization effect sterilization; reduce corrosion of the inner wall of the container.
Vacuum degasser Using process :
open the vacuum pumps (pump according to pump instructions to use), deprived of the inside air, while the material from entering the inlet inside the self-absorption, when the material up to a certain position, the control valve automatic control of materials, at this point, as the hole can observe and control the feed rate, when inside the vacuum reaches technological requirements, the material can be extracted from the material outlet, just keep out of the vacuum and the material balance, you can continue to produce.
Vacuum degasser including the following unit :
1)vacuum pump
2)product transfer pump
3) degasser vessel
4)one set control box
5)with auto inlet valve
Heating and cooling system in the gas is easy to produce gas resistance, lead to partial or the whole system of poor circulation, the heating system is not hot, refrigeration system is not cold. At the same time due to the water containing oxygen and makes heating (cooling) equipment, pipes and steel radiators have oxygen corrosion, leading to perforation, leakage. In the system, the gas can also cause the corrosion of the pump, which directly affects the safety of the whole system. Vacuum degassing method is used to remove the free gas and dissolved gas in the system, so that the system can operate safely and reliably.
Technical features
1, Can greatly shorten the heating or cooling system for the first time after the initial injection of the exhaust time, is conducive to the initial commissioning of the system.
2, The removal of gas in the system, to prevent gas resistance, ensure the normal operation of the system is stable and reliable.
3, Eliminate the pump cavitation, reduce system operation noise.
4, Due to the removal of oxygen in the water, will reduce the system of oxygen corrosion, extend the use of time.
5, Due to the removal of gas in the water, the heat exchanger surface will not be accompanied by gas bubbles, improve the efficiency of heating.
6, The time and cycle of the degassing machine can be adjusted according to need.
7, A single platform for the maximum of 150 m3; can be more than two parallel use.
8, Equipment installation is convenient, automatic operation, safe and reliable, easy to maintain.
Application scope: applicable to all kinds of heating or refrigeration cycle system
Technical parameters
Model |
The highest working pressure(Mpa) |
Set the range(Mpa) |
Power (KW) |
long (mm) |
wide (mm) |
high (mm) |
weight (Kg) |
| TJ1-1-20 | 1.0 |
0-0.25 |
0.55 |
750 |
560 |
1190 |
28 |
| TJ1-1-40 | 1.0 |
0-0.40 |
0.75 |
750 |
560 |
1190 |
30 |
| TJ1-1-50 | 1.0 |
0-0.50 |
0.75 |
750 |
560 |
1190 |
38 |
| TJ1-1-60 | 1.0 |
0-0.60 |
1.1 |
700 |
580 |
1190 |
38 |
| TJ1-1-70 | 1.0 |
0-0.70 |
1.1 |
700 |
580 |
1190 |
40 |
| TJ1-1-90 | 1.0 |
0-0.90 |
1.5 |
700 |
580 |
1190 |
48 |
| TJ1-1-120 | 1.6 |
1-1.20 |
1.5 |
700 |
580 |
1190 |
56 |
| TJ1-1-140 | 1.6 |
0-1.40 |
2.2 |
700 |
580 |
1190 |
62 |
| TJ1-1-190 | 2.5 |
0-1.70 |
3.0 |
700 |
580 |
1190 |
73 |
Our Production
Labelong focus on filling, packing & water treatment field, our factory takes up 60000 square meters ,more than 30 Professinal Tehchnicians and workers which is one of the professional & reliable Chinese manufacturers & provider for liquid & semi-liquid filling & packaging machinery, blow molding machines and water treatment systems with reliable quality & pretty good after sale service with CE certification & ISO9000:2001 certification.| No. | Production line category | Capacity |
| 1 | Hot filling production line | 3,000-36,000BPH |
| 2 | Beverage processing System | 1,000 Ltrs/H to 10,000 Ltrs/H |
| 3 | Bottled water production line | 3,000-36,000BPH |
| 4 | 5L Large capacity bottled water production line | 700-5,000BPH |
| 5 | Carbonated drink production line | 3,000-18,000BPH |
| 6 | Pulp juice production line | 5,000-22,000BPH |
| 7 | Oil Filling line | 3,000-10,000BPH |
| 8 | Linear Filling machine | 300-900BPH |
| 9 | Bottlle Unscrambler | Up to 20,000BPH |
| 10 | Barrelled water production line | 300-2000 bucket/H |
| 11 | Water Treatment system | 1,000 Ltrs/H to 10,000 Ltrs/H |
| 12 | OPP Labeling machine | 6,000-24,000BPH |
| 13 | PVC Shrink Sleeve Labeling machine | 6,000-24,000BPH |
| 14 | Automatic Blow molding machine | 1,000-7,000BPH |
| 15 | Full-automatic Film Wrapper & Shrinker | 8-20packs per minutes |
Removal of the liquid air (oxygen), inhibition of browning, coloring, vitamins, flavor components and other substances oxidation, to prevent quality deterioration; removing liquid adhering to the particles suspended in the gas dispersion, inhibition floating particles, maintaining a good appearance; prevent blistering when canned and high-temperature sterilization effect sterilization; reduce corrosion of the inner wall of the container.
Vacuum degasser Using process :
open the vacuum pumps (pump according to pump instructions to use), deprived of the inside air, while the material from entering the inlet inside the self-absorption, when the material up to a certain position, the control valve automatic control of materials, at this point, as the hole can observe and control the feed rate, when inside the vacuum reaches technological requirements, the material can be extracted from the material outlet, just keep out of the vacuum and the material balance, you can continue to produce.
Vacuum degasser including the following unit :
1)vacuum pump
2)product transfer pump
3) degasser vessel
4)one set control box
5)with auto inlet valve
