Sell Double Drives

Model No.:XYA8
Product Origin:China
Brand Name:
Price Terms:
Payment Terms:
Certification:
Description:This series is a set of integrated speed-down driver, which uses 2 DC motors. It is intended to be used for home bed's head and tail up and down, and the driver has properties of low noise, strong push force, stable drive, simple installation, and easy operation. Specifications: 1) 2 x DC (24V) motors are installed in one plastic body, can drive bed head and tail up and down individually or simultaneously 2) Distance switches can cut off power when push block is moved to limited positions, the limited positions can be regulated as per user's need 3) Protection classification: Class II 4) Protective degree: IP20 5) Supplying power: AC 230V / 50-60Hz 6) Max. rated loading: 2 x 3,500N 7) Stroke: head 87, feet 69 8) Max. driving speed: 5.4mm/s 9) Outlying transformer (50VA/55VA) with thermal fuse to prevent from overload 10) Functions: a) Handle operating board b) Bed head or tail up c) Bed head or tail down d) Bed head and tail up together e) Bed head and tail down together 11) To avoid overload, it has CPU over loading, continual operating time: ≤2min (10s inside operation continuous calculation); if continual operating time: ≥2min, automatic rest time is 18min 12) Driver power and transformer cable must be connected correctly 13) Repair of the product must be completed by specialist, and main power must be switched off 14) Any damages caused by non-authorized persons dismount or repairing, or changing the using way, are out of manufacturer's responsibilities 15) Do not put in wet environment 16) Warning: parts of the products shall not be used as children's toy, and it is forbidden to operate the products by children when no adults aside 17) Installation manual: a) Make the driver in driving connection position b) Aim at bed joints as bed-head and bed-tail directions, and be identical in the position c) Connect handle board, then connect main power plug d) Connect main power e) Push the double-down button, check where "normal position"