This is wheat grinding machine. It is used for grinding wheat.
Advantages:
1. Stronger ABS hopper.
2. 410 stainless steel bucket.
3. Thicker frame.
4. Copper faucet.
HHM Series wheat grinding machine is mainly used for grinding wheat. It can aslo grind bean, peanut, rice, etc..
It is easy to operate, safe, durable and healthy.
It has high working efficiency. It is the ideal machine for grinding wet grains.
It can make nice edible pulp.
Specifications:
| Model | Productivity(kg/h) | Grinding Wheel Diameter(inch) | Motor Power(W) | Voltage/ Frequency | Pulp Temperature(°C) |
| HHM-5 | 30 | Φ5 | 370 | 220V/50HZ | Surrounding temperature+5 |
| HHM-6 | 40 | Φ6 | 550 | 220V/50HZ | |
| HHM-8 | 60 | Φ8 | 1100 | 220V/50HZ | |
| HHM-10 | 100 | Φ10 | 1500 | 380V/50HZ | |
| HHM-12 | 120 | Φ12 | 2100 | 380V/50HZ |
Packaging: Wooden Case.
Packing List for refrence:
Shipping:
By sea or by air.
1. Check before shipping.
2. Reply in 12 hours.
3. Professional team.
Guangzhou Huiheng Co. Ltd.
We specialize in wheat grinding machine.
If you want wheat grinding machine, please contact me. Thanks.
Here are the common questions:
| Faults | Cause | Solution |
1. Pulp is too coarse | 1. The clearance between grinding is too big. 2. The grinding wheels are damaged. 3. The grinding wheels are not parallel. | 1. To adjust the clearance. 2. To regrind or replace the wheels. 3. To reset it. |
2. Pulp"Burning" | 1. The water is insufficient. 2. The clearance between grinding wheels are too small. | 1. To add the water discharge. 2. To add the clearance. |
3. Low output | 1. The grinding wheels are dull. 2. The belts are too slack. | 1. To regrind or replace the wheels. 2. To adiust the distance between the motor and body or replace the belts. |
How to operate?
1. Before use, check if power supply corresponds to that required by the machine, check if the external ground wire is reliable connection. (Warning: Electricaloutlet must be grounded.
2. You must check that the new machine rotates in the direction indicated by the rotation mark. If not, get it right.
3. Please clean and soak the rice or bean into water for four hours.
4. Please put water into the bucket, then open the tap and turn on the machine.
5. Loosen the but-locker, rotate the hand wheel slowly, adjust the clecarance between the grinding wheels until the grinding wheels contact each other slightly. Then rotate the nut-locker lightly.
6. Feed the rice or bean into the funnel, open the feeding lock slowly. When the pulp flow cut from the outlet normally you could adjust the water discharge to control the thickness of the pulp.
Maitenance:
1. Once a few days, please oil the door-ear, the bolt and the bearings to prevent rusted.
2. After use, clean and dry yhe machine throughout, open the machine cover to keep well ventilating to ensure hygiene.