Product Information
500m3 Best Selling Water Treatment Tank Price
FRP water tank production FRP SMC water tank
SMC FRP/GRP Panel Tanks are an ideal way to store water. The panel tank is a modular system,which then enables a tank of any desired size to be assembled and constructed on site.
Volume:0.125m3-1000m3
Size of pannel:1000mm*1000mm, 1000mm*500mm, 500mm*500
Accessories
Internal accessories:
Inside ladder,fixing angle,tie piece,support,tie piece board;
External accessorices.
FRP water tank production FRP SMC water tank
SMC FRP/GRP Panel Tanks are an ideal way to store water. The panel tank is a modular system,which then enables a tank of any desired size to be assembled and constructed on site.
Volume:0.125m3-1000m3
Size of pannel:1000mm*1000mm, 1000mm*500mm, 500mm*500
Accessories
Internal accessories:
Inside ladder,fixing angle,tie piece,support,tie piece board;
External accessorices.
Product name | FRP water tank |
Color | Customized |
Material | FRP GRP fiberglass |
Feature | Storage water tank |
SMC /FRP/GRP fiberglass water tank
1.GB5749 Sanitary Standard for drinking,
2.no water leakage,
3.light weight,
4.beautiful design,
5.long service life
We offer sectional tanks that are made from hot pressed moulded panels to British and European Standards. Although there is no gel coat, the isophthalic resin rich inner surface is ideal for storing wholesome water. Tanks constructed from panels can be built in spaces with restricted access.
1.GB5749 Sanitary Standard for drinking,
2.no water leakage,
3.light weight,
4.beautiful design,
5.long service life
We offer sectional tanks that are made from hot pressed moulded panels to British and European Standards. Although there is no gel coat, the isophthalic resin rich inner surface is ideal for storing wholesome water. Tanks constructed from panels can be built in spaces with restricted access.
Panels
Panel sizes currently offered are:
1. 1 metre square
2. 1 metre by 1/2 metre
3. 1/2 metre by 1/2 metre
All sizes are available either plain or 40mm pre-insulated.
The water quality can meet the standard requirement of GB5749 Sanitary Standard for drinking.
The wide range of panels consist of 2mx1m, 1mx1m, 1mx0.5m and 0.5x0.5m sizes, in varying configurations for use in side, bottom and top, which enables us to assemble.
Sealant
All joints&bolts are sealed with Synthetic Rubber materials.
Internal&External Reinforcements
For all tanks over one meter high-extra reinforcements are required. Internal steel tie rods and External steel sections are Hot Dipped Galvanised as per standard.
Panel sizes currently offered are:
1. 1 metre square
2. 1 metre by 1/2 metre
3. 1/2 metre by 1/2 metre
All sizes are available either plain or 40mm pre-insulated.
The water quality can meet the standard requirement of GB5749 Sanitary Standard for drinking.
The wide range of panels consist of 2mx1m, 1mx1m, 1mx0.5m and 0.5x0.5m sizes, in varying configurations for use in side, bottom and top, which enables us to assemble.
Sealant
All joints&bolts are sealed with Synthetic Rubber materials.
Internal&External Reinforcements
For all tanks over one meter high-extra reinforcements are required. Internal steel tie rods and External steel sections are Hot Dipped Galvanised as per standard.
Physical Properties
Will not corrode, Long Life, Normal fittings can be used, Light weight and extremely strong.The sectional range is further enhanced by the Pre-insulated panel.
Fixings & Fastenings
All nuts/bolts and washers in contact with the water are of stainless steel . Non-immersed nuts, bolts and washers are either zinc plated , passivated or galvanised .
Supports For Panels
The panels shall be supported externally or internally by an adequate support system Elements of external supports shall be hot dip galvanized. Interior supports shall be chemically resistant to the quality of stored water.
Ladders
A GRP sectional tank of 1.5m depth or more shall be provided with an internal ladder made up of terials same with the supports.The external ladders shall be galvanized mild steel or equivalent.
Will not corrode, Long Life, Normal fittings can be used, Light weight and extremely strong.The sectional range is further enhanced by the Pre-insulated panel.
Fixings & Fastenings
All nuts/bolts and washers in contact with the water are of stainless steel . Non-immersed nuts, bolts and washers are either zinc plated , passivated or galvanised .
Supports For Panels
The panels shall be supported externally or internally by an adequate support system Elements of external supports shall be hot dip galvanized. Interior supports shall be chemically resistant to the quality of stored water.
Ladders
A GRP sectional tank of 1.5m depth or more shall be provided with an internal ladder made up of terials same with the supports.The external ladders shall be galvanized mild steel or equivalent.
Manways & Inspection Hatches
Manways are bolted & vented which are in a standard size of: 600 x 600mm. They can be alternatively supplied hinged as a Deluxe Manway Inspection hatches 450 x 450mm are supplied standard with tank(s) holding over 1000 litres.
Maintenance Dividers
On request new sectional storage tank can have an internal maintenance divider fitted within the tank, allowing maintenance works to be carried out without disturbing the system.
Overflow Screens
Capacity and Selection of Optimum Size Tanks
GRP sectional Tanks can be assembled to various capacities From 1000 liters to 1 million liters by selecting the desired length and Width from 1m to 20m, and height of tank from 1m to 4m in increments of 0.5m, as rectangular or square tanks or to any special size.
Manways are bolted & vented which are in a standard size of: 600 x 600mm. They can be alternatively supplied hinged as a Deluxe Manway Inspection hatches 450 x 450mm are supplied standard with tank(s) holding over 1000 litres.
Maintenance Dividers
On request new sectional storage tank can have an internal maintenance divider fitted within the tank, allowing maintenance works to be carried out without disturbing the system.
Overflow Screens
Capacity and Selection of Optimum Size Tanks
GRP sectional Tanks can be assembled to various capacities From 1000 liters to 1 million liters by selecting the desired length and Width from 1m to 20m, and height of tank from 1m to 4m in increments of 0.5m, as rectangular or square tanks or to any special size.
Details Images
Related Products
Our company
Our company
Hengshui Aoliande Trade Co., Ltd. is professional company which to market & sell FRP Pipe, FRP storage tank, FRP molded products,FRP pultrused products and FRP production machines, through the continuous development and introduction of professionality and technology, the company rely on advanced technology, exquisite craftsmanship, reliable quality and perfect service, passed ISO9001, ISO14001, OHSAS18001 management system certification, now we have 50+ staff, annual sales of glass fiber reinforced plastic series products achieved 5,000,000 USD, products have been sold to all over the world,and won the support and trust from new & old customers.
Certifications
FAQ
Q: Are you a trading company or a manufacture factory?
A: Our factory is one of the biggest FRP products, FRP machines manufacturer in China.
Q: What is your payment terms ?
A: Normally,50% as the deposit first by T/T, the rest 50% will be paid before shipping by T/T.
Q: How about after-sales service ?
A: 1 year free warranty, Lifetime technical service support.
Q:Have you some videos where we can see the producing?
A: Yes, we can provide some videos.
For more details, please feel free contact us.
A: Our factory is one of the biggest FRP products, FRP machines manufacturer in China.
Q: What is your payment terms ?
A: Normally,50% as the deposit first by T/T, the rest 50% will be paid before shipping by T/T.
Q: How about after-sales service ?
A: 1 year free warranty, Lifetime technical service support.
Q:Have you some videos where we can see the producing?
A: Yes, we can provide some videos.
For more details, please feel free contact us.