Double Hook Tow Strap
1. Name: Double Hook Tow Strap
2. Size: 2"TOW STRAP W/EYES(20'STRAP)
3"TOW STRAP W/EYES(20'STRAP)
4"TOW STRAP W/EYES(20'STRAP)
and so on
3. W.L.L and B/S
2"TOW STRAP W/EYES(20'STRAP)
W.L.L:3333LBS/1515KGS B/S:10000LBS/4545KGS
3"TOW STRAP W/EYES(20'STRAP)
W.L.L:4333LBS/1970KGS B/S:13000LBS/5910KGS
4"TOW STRAP W/EYES(20'STRAP)
W.L.L:5000LBS/2270KGS B/S:15000LBS/6818KGS
and so on
4. Pull Strength: 1-20Ton
5. Certification: ISO CE GS
6. Material: PE/PP
7. Color: yellow, blue, orange or as customer's request
8. Packing details: PE shrink wrapped in export carton on pallet or as customer's required.
Instructions
1
Look under the car near the axle and locate one of the small holes in the frame. This is where you place the hook of the tow strap. These small holes are required to be on every American made car and most foreign models, and are usually located near the axle. Do this for both vehicles.
2
Insert the hook of the tow strap in the opening on both the towing vehicle and the vehicle to be towed. Insure that the tow strap is not rubbing against any sharp metal surface on the frame or bumper as this may cause the tow strap to rip or tear.
3
Drive with caution. It is not recommended that you exceed while towing a vehicle with a tow strap. The driver of the towing vehicle should drive slowly and use caution when applying pressure to the gas pedal. Avoid quick starts and stops. The driver of the towed vehicle should avoid riding the brakes as that can cause unnecessary stress on the car doing the towing.
Warn:
1.Never use slings with damges or defects.
2.Only use slings with clear identifications
3.Before use,check,rated working load,length and working position
4.Never use slings when the load more than rated working load
5.Never use slings when knots
6.Never use silngs on sharp edges without correct protuction
7.Use the correct model factor and check lifting angel before use
8.Never use slings under-40 celsius centigrade degree or higher than 100 celsius centigarde degree
9.Slings should be stored in dry and clear conditions,away from heat sources or direct sunlight and UV rays
10.People should be away from working area for safety when using