Verti-Draining helps alleviate waterlogging and deep aerates the ground to promote healthy growth. The ‘Verti-Drain’ de-compacts the soil on sports pitches by inserting equally spaced holes in the turf which allow water and air to filter through to the grassroots.
KASHIN Turf Equipment from Weifang, Shandong, China produces KASHIN Verti-Drain DK7212.
This Verti-Drain DK7212 has a 3-speed gearbox, which will match up to virtually any tractor. The popular Verti-Drain 7212 is an ideal machine for use on greens and most sports turf surfaces where limited access or horsepower is available.
One of the challenges that face the turf care professional is the battle against compaction. The KASHIN Verti-Drain DK7212 has been specially designed with a wide choice of tines for aeration which assists both drainage and irrigation. It is also through these cavities that the plant develops and extends its roots system giving stronger and healthier turf. DK7212 Verti-Drain is well suited to lower hp tractors where access is restricted or a lighter footprint is required. These highly productive machines are easily adjusted and work to a maximum depth of 25cm (10″) and use 12mm or 19mm (½” or ¾”) tines or mini-tines which are often used for Summer aeration. DK7212 Verti-drain is an efficient machine for use on sports fields and all areas of the golf course. The DK7212 model is light enough for application on the golf greens, whilst strong enough for hard soils.
(a) Unique Adjustable Parallelogram Forced Heave Shatters compaction in any ground conditions. Versatile with single-point adjustment for optimum results and hollow coring (b) 3-Speed Gearbox Matches your tractor’s ground speed exactly to achieve the desired hole spacing. Creep speed tractor gear not essential (c) Sealed Bearings / Not Bushings Long maintenance-free life (d) Higher Working Speed Greater working capacity (e) Useable Playing Surface Aerate at any time without interruption to play (f) Simple Tine Design (g) 10” (250 mm) Penetration Relief of compaction, removing any hardpan of at depth up to 10” (250 mm) (h) 2.5” (65 mm) Spacing Between 0.5” (12 mm) Tines High density of aeration
Easy to change and cheap to replace
Model | Verti-Drain 7212 |
Working width | 48″ (1.20m) |
Tractor Speed @ 500 Rev’s at PTO | – |
Spacing 2.5” (65 mm) | Up to 0.60 mph (1.00 kph) |
Spacing 4” (100 mm) | Up to 1.00 mph (1.50 kph) |
Spacing 6.5” (165 mm) | Up to 1.60 mph (2.50 kph) |
Hole Spacing Side-to-Side | 4” (100 mm) @ 0.75” (18 mm) holes 2.5” (65 mm) @ 0.50” (12 mm) holes |