Specifications
Ozone monitoring and Controlling with Temperature/Humidity Detection. Provide up to 1xanaloge output and 1xrelay output.
Semiconductor Ozone Controller
Features
u Real time detect ambiance ozone gas level
u Detect temperature and humidity at the same time
u Wall mounted with LCD display
u LCD can display ozone, temperature and humidity,
also controlled device status etc.
u Ozone measured range:10ppb~500ppb;
Temperature range: 0~50°C and relative humidity range:5~95%RH
u Semiconductor sensor inside, high sensitivity to ozone gas
u Special design compensation of ozone measurements for environment temp.&RH%
u Provide an easy zero calibration way
u Modbus RS-485 interface with 15KV antistatic protection, independent base address setting
u Optional 1X relay dry-contact output for an ozone generator or a fan optional
u Optional 1Xanalog linear output (0~10VCD) for the ozone measurement
Specifications
Gas detected | Ozone gas |
Sensing element | Semiconductor gas sensor |
Life time of ozone sensor | More than 5 years |
Temperature sensor | NTC5K |
Humidity sensor | HS series capacitive sensor |
Power supply | 24VAC/VDC |
O3 measuring range | 10~500ppb (0.01~0.5ppm) |
Display resolution | 1 ppb |
O3 measuring precision | ±10ppb + 20% reading @10~50°C/20~90%RH |
Temperature measurement range | 0~50°C(32~122°F) |
Humidity measurement range | 5~95%RH |
Warm up time | 96 hours(first time) 1 hour(operation) |
Analog output (option) | 0~10VDC linear output |
Output resolution | 10Bit |
Relay output (option) | One dry contact output to control an ozone device or a ventilation device Rated switching current 2A resistance load |
RS485 interface | Modbus protocol with 19200bps. 15KV antistatic protection, independent base address |
Operation conditions | 0~50°C/5~95%RH,non condensing |
Storage conditions | 5~50°C/5~90%RH,non condensing |
Net Weight | 260g |
Dimensions | 120mm×90mm×24mm |
Installment standard | 65mm×65mm or 2”×4” wire box |
Wiring standard | Wire section area <1.5mm2 |
Approval | CE-Approval |
Models
Model | Characteristic |
F2000IAQ-O3-1001C | Ozone monitor & controller with 1Xon/Off relay output, Modbus RS485 interface |
F2000IAQ-O3-1010C | Ozone monitor & controller with 1X analog output. Modbus RS485 interface |
F2000IAQ-O3-1011C | Ozone monitor & controller with 1Xon/Off relay output and 1X analog output. Modbus RS485 interface |
F2000IAQ-O3-1000C | Ozone monitor & controller with a Modbus RS485 interface |