5MP Raspberry Pi Model B Camera 500 million pixels Photosensitive chip OV5647 Static image resolution is 2592 × 1944 Support 1080p30, 720p60 and 640×480p60/90 video recording Size: 25mm × 24mm × 9mm Software usage: First enable the camera in the system: sudo raspi-config -> Camera ->Enable Take a picture: Execute the following command in the terminal: Single-board Raspberry Pi 3 Model B + Raspberry Pi 3 Model B Wholesale In StockRaspistill -o image.jpg -t 10000 Image.jpg will be generated -t 10000 means 10S Shooting video Execute the following command in the terminal: Raspivid -o video.h264 -t 10000 Will generate video.h264 video -t 10000 means shooting time 10S When shooting, want the video display interface to fill the entire LCD 7-inch screen, you can execute the following command: Raspivid -w 320 -h 240 -p 0 -t 10000 -o video.h264 Play the video you shot: Omxplayer -o hdmi video.h264 (after executing the command, wait a few seconds to play) |
Specification
The Raspberry Pi 3 Model B+ is the final revision in the Raspberry Pi 3 range.
Broadcom BCM2837B0, Cortex-A53 (ARMv8) 64-bit SoC @ 1.4GHz
1GB LPDDR2 SDRAM
2.4GHz and 5GHz IEEE 802.11.b/g/n/ac wireless LAN, Bluetooth 4.2, BLE
Gigabit Ethernet over USB 2.0 (maximum throughput 300 Mbps)
Extended 40-pin GPIO header
Full-size HDMI
4 USB 2.0 ports
CSI camera port for connecting a Raspberry Pi camera
DSI display port for connecting a Raspberry Pi touchscreen display
4-pole stereo output and composite video port
Micro SD port for loading your operating system and storing data
5V/2.5A DC power input
Power-over-Ethernet (PoE) support (requires separate PoE HAT)