24V ultra high sensitivity vibration time delay module and relay module plus time delay three in one module,Vibration switch module alarm
The power supply voltage may be6-24VWide voltage
This vibration time delay module relay is not normally closed.
Use:
Vibration trigger alarm delay, can be directly used for car alarm, vibration switch, and a variety of large current, high voltage occasions.
Module features:
1Super high sensitivityVibration sensor;
2 vibration sensors can be connected in the detection position, length of 5 meters in sensitivity to no effect
3 with anti - power supply connected to anti - protection diodes, effective protection of products;
4 with a regulated IC, to provide a stable supply of adequate power;
5, using high performance timing CPU design, double PCB plate;
6, the power indicator (red LED) and switch trigger timing indicator (green LED);
7, the output can be connected to AC 30A 30V or DC 30A 250V load;
8, this module forNormally open type vibration sensorWhen.Vibration transducerWhen the module is started.Light green, LED, relay, time end, green LED, the relay is released.
9,In the time of the trigger end, in the time of the delay time to receive a vibration trigger signal, the relay has been connected, the relay will not disconnectFlash break,shockTrigger signal after the stop, from the newstartTime, delay time to relay off;
10, timing potentiometer adjustment time,Product design for 1-180 seconds adjustable, can also be customized time range;
11, the time error of 5%
Module instruction:
Vibration sensorInduction to haveWhen shaking, relayPull, delay start time, at this time, the green lightBright,That is, the public side K1 and often start G1 connection.
Product application:
1, with a variety of other sensor plus relay module, can do a variety of time delay switch, direct with the echange of 220V products;
2, corridor delay switch, delay energy saving products;
3, the ground motion sensor can do all kinds of alarm delay trigger, such as earthquake alarm, anti-theft alarm
4, then vibration sensor can also be applied to auto start automatic trigger control related products;
5, machinery and equipment to stop the delay alarm.
Electrical parameters:
Power supply voltage: 8-24VDC wide voltage
Current: more than 100mA
Load: 30A 250V AC or 30A 30V DC
Delivery list:
24V vibration sensor delay module,With ultra high sensitivity vibration sensor.
Diagram of the connection of the vibration time delay switch:
Time delay adjustment potentiometer:Adjustable time,Reverse timeIncrease time of needle,ShunNeedle reduction time,1-180 seconds can be adjusted, but also can be customized time range
Relay module control AC equipment wiring diagram:
Relay module control DC equipment wiring diagram:
Need bo can open the following link to buy, pay attention to is not complete, but can be installed under the board oh.
Item.taobao.com/item.htm? Spm=a1z10.3.0.83.7l8naV&id=20220372373?&