The communication between the node and the field devices (eg PLC) takes place via the Ethernet interface of the fieldbus coupler, and the communication between the fieldbus coupler and the I/O modules takes place via the local bus. The two Ethernet interfaces are internally integrated with a switch function, which can establish a linear topology without the need for additional switches or hubs.
The system needs to use the power module to provide 24VDC system voltage and 24VDC field voltage. Since two independent power supplies are used, the field voltage input interface and system voltage input interface of BL200 series couplers are electrically isolated from each other.
When assembling fieldbus node modules, each I/O module can be arranged in any combination, and it is not required to be grouped by module type.
A terminal module must be plugged into the end of a fieldbus node to ensure correctdata transmission.
Real-Time Control System Digital DI/DO Ethernet Switch EtherCAT IO Module
Brand Name | BLIIOT |
Place of Origin | China |
Model Number | BL202 |
Product Features
BL202 coupler is a data acquisition and control system based on a powerful 32-bit microprocessor design with a Linux operating system.
The BL202 distributed I/O system consists of 3 parts: Coupler, I/O modules and terminal modules.
You May Like
- Digital and Analogue Inputs and Outputs EtherNet/IP Distributed IO
- Industrial Controller OPC UA Communication Protocol Suitable for IIoT and Industrial Automation
- Programmable Logic Controller MQTT IO Module for Distributed Data Acquisition and Control Systems
- Supports VPN and TLS/SSL Data Encryption Flexible EdgeIO Controller
- For Building Data Acquisition HVAC Monitoring and Control BACnet/IP IO Module
- Alarm Controller with Temperature and Humidity Sensor Inputs for Environmental Monitoring RTU5023
- GSM 3G 4G Remote Switch Controller for Gates, Barriers, Shutters, Machines RTU5024
- Power Condition Monitoring Controller with 12VDC Output for Mains Normal and Outage Monitoring
- BLIIoT R40B Serial RS485/RS232 Dual SIM Modbus MQTT Edge Computing Router
- Support SSL Encryption, Protocol Conversion and Timing Control Modbus MQTT Cellular 4G Edge Router
Popular Searches
lightning conductor
Copper Lightning Rod
Lightning Rod Clamp Earth Rod
earthing system
transmission rod
11 kv lightning arrester
Copper Clad Steel Ground Rod
static eliminator
anti static device
Air Blower Electrostatic Eliminator
lightning connector
plasma tv lift
mtl safety barrier
copper earthing bar
copper earthing rods
electrical earth rod
Find Similar Products By Category
You May Like
- BLIIoT 4G RTU Telemetry Terminal for ATM, POS, Meter, PLC, DAQ Transmission
- S271 Input and Output SMS Temperature Alarm Pulse Counter 4G RTU
- RS485 with Extension IO Wireless Data Acquisition RTU for Bridge Monitoring and Control
- Remote monitoring for Unattended Plant Rooms 8DI 4DO 1TH 1RS485 SMS Controller
- SMS Alarms for Data Monitoring and Acquisition in Industrial Automation
- S475 Remote Terminal Unit with GSM/GPRS/3G/4G Network Communication
- BL120 Industrial Ethernet Gateway with Ethernet Port and RS-232/485 Serial Port
- BL121 DC 9-36V Wide Power Voltage Input for Industrial Internet and Industry 4.0 OPU UA Gateway
- BL101 Supports 4G Communication 2 Channel RJ45 Ports Modbus to MQTT Industrial IoT Gateway
- BLIIOT S7 300 PLC to MQTT Converter Supports NMPV1/V2 Protocol
- BL103 Modbus PLC to OPC UA PLC IoT Gateways Sensor Data to Ignition
- BLIIOT BL104 Plc Controller Supports Remote Configuration and Remote Firmware Upgrade
- BL110 Suitable for Digital Factories and Supports Data TSL/SSL Multi-Protocol to MQTT Gateway
- Energy Gateway with WiFi or Ethernet Port for Internet Access
- Power Protocol Gateway with Ethernet Port and RS-232/485 Serial Port