Products Description
ASJ10-LD1A Residual Current Relay
ASJ Series Residual Current Relay
ACREL ASJ Series of action relay of after-current, low-voltage circuit break or low-voltage contactor can be made up for combined after-current production device, which is mainly applied for the TT and TN system distributing circuit with the alternating current 50Hz, the rated voltage 400V or below.
ASJ Series of action relay of after-current is applied in the earth fault protection for the electric circuit, so as to prevent the equipment damage and the fire accident of electric equipment caused by the ground fault current, moreover, it also can provide indirect contact protection against the electric shock risk.
* The measurement of A-type after-current
* The streamer display of current percentage;
* The setting of rated residual action current
* The setting of non-driving time of limitation
* Two- pair relay output
* Possessing the function of on-the-spot and long- distance testing and resetting* Frequency: 50Hz±5Hz
* Auxiliary power supply: AC110V, AC220V, DC85 ~270V (permissible error±10%)
* Consumption: ≤5W
Frequency
50Hz±5Hz
Auxiliary power supply
AC110V, AC220V, DC85 ~270V
(permissible error ±10%)
Consumption
≤5W
Installation
Din rail 35mm
Dimension(L*W*H)
85*54*64mm
Types of Product
Type | Function | Installation |
ASJ10-LD1C | AC-type residual current measurement; Alarm prompt of current crossing line; Rated residual operating current can be measured; Limit non-driving time can be set; Two sets of relay output; With local and remote “test” and “reset” functions. | (DIN 35mm) |
ASJ10-LD1A | A-type residual current measurement; Current percentage light column display; Rated residual operating current can be measured; Limit non-driving time can be set; Two sets of relay output (settable)note 1; With local and remote “test” and “reset” functions. | |
ASJ10L-LD1A note2 | A-type residual current measurement; Rated residual operating current can be measured; Limit non-driving time can be set; Two sets of relay output (settable); Transformer breakage alarm can be set; Pre-alarm value can be set; Return value can be set. With on-site display, remote "test", "reset" LCD display, 25 event records. | |
ASJ20-LD1C | AC-type residual current measurement; Alarm prompt of current crossing line; Rated residual operating current can be measured; Limit non-driving time can be set; Two sets of relay output; With local and remote “test” and “reset” functions. | (48*48) |
ASJ20-LD1A | A-type residual current measurement; Current percentage light column display; Rated residual operating current can be measured; Limit non-driving time can be set; Two sets of relay output (settable)note 1; With local and remote “test” and “reset” functions. |
Note 1: The function of setting for relay means that you can set the initialization and the output state of relay by yourself through the code dialing on the panel; the specific setting guide can be found from the chapter 5.2.
Note 2: Optional function, RS485 interface, Modbus-RTU Communication, type is ASJ10L-LD1A/C.
Technical Parameter
Technical Parameter | Indicator | ||||
AC type | A type | ||||
Power supply | Voltage range | AC110V、AC220V （±10%） | AC/DC85~265V | ||
Power dissipation | ≤5W | ||||
Input | Rated residual operating current I△n | 0.03、0.1、0.3、0.5(A) | 0.03、0.05、0.1、0.3、0.5、1、3、5、10、30(A)note 3 | ||
Limit non-driving time △t | 0.1、0.5(s) | 0、0.06、0.1、0.2、0.3、0.5、0.8、1、4、10(s)note 4 | |||
Rated residual non-operating current I△no | 50%I△n | 50%I△n | |||
Performance characteristics | Sinusoidal AC | Sinusoidal AC and pulsating DC | |||
Frequency | 50Hz±5Hz | 50Hz±5Hz | |||
Operating range | -20% ~ -10%I△n | -20% ~ -10%I△n | |||
Output | Output mode | One is normally open and another is for transformation | One is normally closed or open, and another is for transformation | ||
Contact capacity | 5A 250VAC 5A 30VDC | AL1:8A 250VAC; 5A 30VDC AL2:6A 250VAC; 5A 30VDC | |||
Reset mode | Local reset or remote reset | Local reset, remote reset or automatic reset | |||
Installation and use environment | Temperature | Run temperature：-20℃ ~ +55℃，Storage temperature：-30℃ ~ +70℃ | |||
Humidity | ≤95%RH，no condensation, and no corrosive gas places | ||||
Elevation | ≤2000m | ||||
Class of pollution | Grade three | ||||
Installation category | Type Ⅲ | ||||
Note 3: ASJ10L-LD1A rated residual operating current IΔn is 10mA~30A continuously adjustable;
Note 4: ASJ10L-LD1A limit non-driving time Δt is 0~10S continuously adjustable.
Wiring Illustration
Dimension & Installation
Solution Structure
Certification
Company Profile
FAQ
Title goes here.
Semi-Automatic PET Bottle Blowing Machine Bottle Making Machine Bottle Moulding Machine
PET Bottle Making Machine is suitable for producing PET plastic containers and bottles in all shapes.
