IT Power Distribution, description about ACREL 300286 AIL100-8 insulation fault locator applied in insulation system on China Suppliers Mobile

Product Description

Introduction

The medical IT system is mainly used in important Class 2 medical locations such as operating room, ICU/CCU
intensive care unit, providing safe, reliable and continuous power distribution for the important equipment at these
locations. Medical insulation monitoring and fault locating device is developed by the many years’ design experience
of the Acrel Electric in electric power meter industry, according to the special requirements of the insulation
monitoring and fault locating of the power distribution system in Class 2 medical locations. The products can realize
the real-time monitoring of insulation, load and temperature of isolation transformer in IT system, and have the
functions of system insulation fault loop positioning and centralized monitoring by multiple pieces of systems.
Products conform to the provisions of enterprise standard Q31/0114000129C013-2016 IT System Insulation
Monitoring Instrument.
Medical IT system insulation monitoring and fault locating products (seven-piece set) include AITR series
medical isolation transformer, AIM-M200 medical intelligent insulation monitoring instrument, AKH-0.66P26
current transformer, AIL100-4/AIL100-8 insulation fault locator, ASG100 test signal generator, DR-60-24 power
module and AID200 centralized alarm and display instrument, which are shown in Table 1.
2. Technical parameters ofASG100,AIL100-4/AIL100-8 test signal generator

Features

1. Insulation fault location in medical IT systems. 2. 4 or 8 channels with measuring current transformer per AIL100.
3. Up to 16 measuring channels can be combined by can bus in one
4. medical IT system.
6. A response time of up to 5 s in medical IT system acc. to IEC61557-9.

Dimension

Wiring

Typical connection

Technical parameter

Item	Model	AIL100-8
Power supply	Voltage	DC24V
Power supply		Power consumption	≤2VA
Monitored system	Rated voltage	AC220V
Monitored system		rate frequency	45~60HZ
Locating signals	locating voltage	<25V a.c.r.m.s
Locating signals		locating current	<1mA r.m.s.
Fault locating	Maximum circuit	8 circuits
Fault locating		Response time	<2s
Communication	Mode	CAN communication
Communication		Protocol	self-defined protocol

ACREL 300286 AIL100-8 insulation fault locator applied in insulation system

Product Features