Overview
0-10V dimming driver controls the load on-off as the diming module and outputs 0-10V dimming signals. The dimmer receives the con
trol message from the bus and then executes the corresponding actions according to the set parameters. With ETS programming, the d
immer can realize multiple control functions. The high voltage line is not changed and the lighting control is changed.
trol message from the bus and then executes the corresponding actions according to the set parameters. With ETS programming, the d
immer can realize multiple control functions. The high voltage line is not changed and the lighting control is changed.
Technical Parameters
Power supply feature | KNX bus feeder | DC21~30V | |||||
Power supply current | ＜12mA | ||||||
Power consumption | ＜360mW | ||||||
Load current | ＜16A | ||||||
External connection | KNX-TP1 | Use twisted-pair cable conforming to KNX standard. | |||||
Wiring terminal at load end | Terminating with 0.5nm~0.6nm torque | ||||||
Operation and display interface | Programming key and relevant indicator | LED indicator is in red when waiting for programming and is in green during and after programming. | |||||
Temperature range | Operating temperature | -5℃~+45℃ | |||||
Storage temperature | -25℃~+55℃ | ||||||
Installation | Standard 35mm track installation | ||||||
Manual Control
Auto Control
Scene Control
Time Control
Centralized Control
You May Like
-
Acrel LED display Temperature and humidity Measuring & controlling device WHD46-11
-
Acrel LED display Temperature & humidity controller WHD46-11
-
Acrel loop grid cabinet Temperature and humidity Measuring & controlling device WHD46-11
-
Acrel loop grid cabinet Temperature & humidity controller WHD46-11
-
Acrel LED display Temperature and humidity Measuring & controlling device WHD72-11
-
Acrel RS485 communication Temperature and humidity Measuring & controlling device WHD72-11/C
-
Acrel loop grid cabinet Temperature and humidity Measuring & controlling device WHD72-11
-
Acrel loop grid cabinet Temperature & humidity controller WHD72-11
-
Acrel power distribution system Temperature and humidity Measuring & controlling device WHD72-11
-
Remote automation remote communication and control unit ARTU-KJ8
Find Similar Products By Category
You May Like
- Din rail remote monitoring unit with power relay ARTU-KJ8
- High quality remote terminal unit used in industrial automation ARTU-KJ8
- Factory price intelligent power distribution system remote communication & control unit
- ARTU-KJ8 remote monitoring unit used in the intelligent power distribution system
- Acrel ARTU-KJ8 intelligent power distribution system Remote Terminal Unit
- ARTU-KJ8 remote monitoring unit with rs485
- Acrel ARTU-KJ8 remote communication & control unit
- Acrel 300286.SZ AM5-C 35kv used capacitor Protection and control Relay for protection control measurement supervision
- Acrel 300286.SZ AM5-F 35kv used Protection and control Relay for feeder in industrial power systems
- Acrel 300286.SZ AM5-F 35kv used feeder protection and control relay for utility substations
- Acrel 300286.SZ AM5-B 35kv substation used busbar connection Protection Relay
- Acrel 300286.SZ AM5-B 35kv used Protection Relay for automatic switch device of standby power supply
- Acrel 300286.SZ AM5-M 35kv used Protection Relay for substation motor protection
- Acrel 300286.SZ AM5-F 35kv used medium voltage substation feeder line Protection Relay
- Acrel 300286.SZ AM5-F 35kv used Protection Relay with remote control GPS