Specifications
1.Floor surface water repellent chisel hairs;2.High speed railway box surface roughness and waterproof treatment
Characteristics:
1.Floor surface water repellent chisel hairs;
2.High speed railway box surface roughness and waterproof treatment
3.Clearing up the asphalt pavement chung bag, rutting, cracking, potholes and other parts
4.Asphalt concrete new spread before the original old pavement mild nap, or cooperate with large milling planer finished edge area and reinforced with area of milling nap operation
5.Remove surface coating, paint, all kinds of traffic line, the ground is impaired, product and need renovation, but notice floor surface, etc
6.Removing the airport road line and the braking trace of plane road way tire, etc., to obtain high friction coefficient of the rough surface
7.To cement asphalt pavement, highway bridge, the bridge wrong table, epoxy resin wear-resisting ground overweight high place, milling, leveling way micro surface treatment construction
8.Milling clearing up the original old pavement surface and preparation for slurry seal.
Technical parameters
Item | KB300 | KB250Ⅰ | KB250Ⅱ |
Engine configuration
| 7.5 KW electric motor | 7.5 KW electric motor | HONDA GX390 petrol motor |
Knife shaft number
| 8 roots 160 pieces (8 Tooth blades) | 6 roots 96 pieces (8 Tooth blades) | 6 roots 96 pieces (8 Tooth blades) |
Bearingsealingtype | Sealed | Sealed | Sealed |
Once milling width | 300mm | 250mm | 250mm |
Once milling | 5mm-8mm | 3mm-5mm | 3mm-5mm |
Weight | 200kg | 170kg | 155kg |
Dimension(L*W*H) | 1150*550*1250mm | 1100*530*1150mm | 1100*530*1150mm |
Working efficiency | 1100m2/H(napping) 80m2/H (Milling depth) | 700m2/H (napping) 50m2/H (Milling depth) | 700m2/H (napping) 50m2/H (Milling depth) |
Walkround | 3 | 3 | 3 |
Airdampingcylinder | 2 | 2 | 2 |
