ACT 4cylinders cng lpg sequential system lpg kit china lpg conversion kit for cars glp gpl autogas equipment
ACT 4cylinders cng lpg sequential system lpg kit china lpg conversion kit for cars glp gpl autogas equipment
ACT 4cylinders cng lpg sequential system lpg kit china lpg conversion kit for cars glp gpl autogas equipment
ACT 4cylinders cng lpg sequential system lpg kit china lpg conversion kit for cars glp gpl autogas equipment

ACT 4cylinders cng lpg sequential system lpg kit china lpg conversion kit for cars glp gpl autogas equipment

Negotiable

Min.Order:1

Supply Ability:
1000 per Month
Payment Terms:
T/T Credit Card

Chengdu ACT Technology Co., Ltd.

Business Type: Other
Main Products: ECU kits ,Reducer ,Switch kits ,Timing advancer

Product Details

Products Description
ACT 4cylinders cng lpg sequential system lpg kit china lpg conversion kit for cars glp gpl autogas equipment


Advantages of LPG/LPGV modified car
1) Emissions are significantly reduced.    2) The toxicity of harmful emissions is lower than when gasoline is used. This mainly refers to the emission of hydrocarbons (HC), and the HC emission when burning LPG does not contain any more harmful components such as aromatic hydrocarbons. The hydrogen/carbon atomic ratio of LPG is 2.5~2.7, and gasoline is about 2.25. When LPG is used, CO2 emissions are lower. Considering the possibility of various compounds forming ozone, LPG emissions are definitely better than gasoline. 3) Since LPG fueled does not form an oil film on the engine intake manifold or the wall of the intake duct, and does not need to be enriched in cold state like gasoline, therefore, the emissions during the 40s after the start of the test cycle and during the warm-up process Better than gasoline. For the European III emission regulations to be implemented in the future, the adaptability is better.

Component :

The installation of the gas equipment comprises the following parts:
Product Name
Recommended Products
1. LPG Injector rail 
VK37 / VAL/RAIL Injector rail 
2. ECU kits
MP36 / MP48 / N18 / 6504 ECU kits 
3. LPG reducer
ACT-09  / ACT-13 / vaporiser reducer 
4. High pressure tube
6m*6mm carbon steel/copper/stainless steel high pressure tube
5. Manometer
CB08/201C Maometer
6. ECU Switch 
MP36 / MP48 ecu switch
7. Filling Vavle
QF-T1H6/CTF-10/T2H/T2H-1/QF-T1H9/QF-T3H/ TES filling vavle
8. Cylinder tank
30-40-60-90-120 L LPG cylinder tank
9. Filter 
12*12mm F-01 / F-02 / F-03 filter
10.Relay
Relay (5V or 12V)
10. Rubber cap and belt
common rubber cap and 2. 5M belt
11. LPG Casing
Water pipe 7.5*14*1500 mm 
Vacuum tube 4*9*1500 mm 
Jet tube 5*11*1200 mm 
Low pressure gas pipe 10*16*800 mm 
Bellows 34.5*650 mm
12. Accessories bags
LPG sequential injection accessories bags
1) Have higher economic benefits. Under the same conditions of engine thermal efficiency, the fuel cost of a car that uses natural gas alone as fuel is about half or even less than that of a gasoline car or a diesel car. (2) It has good social benefits and protects the environment.Considering the source of fuel, it is more beneficial to environmental protection. (3) Relatively safe.

Notice :

There are a few checks that need to be performed before the vehicle enters the installation workshop for conversion, to determine whether it is suitable for installation of the NGV equipment.
The structure of the vehicle must be inspected, to check if it is in a good state that allows adequate fitting of the supports of the various elements such as the NGV tank (s), the pressure regulator, the high-pressure pipe clamps, etc.
To make sure that the motor functions properly, check the following:
The ignition system: spark plugs, spark plug cables, contact points, condenser, ignition coil, ignition plate and distributor. The faulty state of any of these parts will cause a poor ignition spark, thus hindering the good functioning of the equipment.
The battery must provide 12 volts of power to the pressure regulator so that its electrovalve will open properly when the vehicle is operating on gas. The engine’s carburetion system must also work properly because even though a NGV system is being installed, the vehicle must be capable to operate in bi-fuel mode (gasoline/gas).
If the vehicle is not in good condition, the installation of the NGV system will not result in a satisfactory operation vehicle.
Related Products

HOT SALE

4 CYLINDER MP36 ECU KITS

HOT SALE

4 CYLINDER MP48 ECU KITS

HOT SALE

568 CYLINDER ECU KITS

HOT SALE

4 Cylinder LPG KITS

HOT SALE

4 Cylinder CNG KITS


Certifications
Our Company




Until now, we have participated in well-known foreign exhibitions as scheduled. Such as SUFGAS in Russia , Peru FIGAS in Peru , ALTFUELS in Mexico etc . ,


We have sold our products more than 60 countries around the world . We are committed to promoting our products to the world , leads green world , better environment !

ACT can provide customized products and OEM&ODM technology service.installation support for full cng/lpg kits,and
technical support services-after sales.

Welcome to visit ACT !!! We are looking forward to cooperating with you sincerely .
Packing & Delivery

Packaging

A:Common Packing: Plastic bag + Label + Inner Box+Export Carton


B:Customized Packing: OEM Label, Inner Box,etc.

C:Package will be processed after all the tests finished.

Transportation

(1)By sea,by air,or by express (TNT,Fedex,UPS,DHL,EMS etc);

(2)We can provide freight services or deliver the goods to your designated forwarder.

(3)We support most inlan dport, such as Shanghai ,Guangdong .

FAQ


Why choose us?.................................................................

1)Top Quality. Every product is made through strictly production process and quality testing, which has pass the test of BV,ISO, CE and GOST, and been accepted by clients spreading over 43 countries even including Italy and Poland.

2)2-year Warranty. All products enjoying 2 years free of equipment maintainence warranty.

3)Free Sample. If you order a set of products for testing, we will return the freight to you from your next normal order;if you order a component for testing, we will return the sample charge to you.

4)Cost Saving. We provide long-life, shock-resistant autogas equipment with excellent quality and better performance, resulting in cost saving.

5)Quick Delivery. We promise to ship your goods with 3 days after confirming your order, or we would like to return your payment if you asked.


Can your factory supply OEM serive?.........................................

Yes, we can. Send us the sample or the detailed speicifications of the products you want to clone →calculate the cost of opening model →start to produce the sample for testing →continue to produce according to your feedback.

What's your MOQ, payment terms?............................................

Our MOQ :1 piece for sample order,5 pieces for normal order.

Our payment terms: T/T, D/P, L/C, Paypal, Westernunion.


Recommend Products

Contact Supplier

You May Like

New Products

Recommended Products

View More View Less

Find Similar Products By Category

Automobiles & Motorcycles > Auto Engine > Other Auto Engine Parts
Categories
Hi~