HDMI switch 2x1 switch Multi-Viewer With picture in picutre, support RS232 and IR
I. Introduction
This product is a high performance 2 by 1 Multi-Viewer. It supports two High definition input source display on one screen. As a Multi-Viewer, it can display on one screen in 4 modes.
II. Features
- 1. Compliant with HDMI 1.3a,HDCP 1.2;
- 2. Supports multiplexed HDMI 2-input and 1-output and 4 display modes;
- 3. Supports up to 1080p High Definition resolution;
- 4. Support scaler up, scaler down function;
- 5. Support multi output resolution;
- 6. Support digital audio format LPCM/AC3/DTS
III. Package
- 1. HDMI 2x1 Multi-Viewer ------------------------------------------------------------------ 1PC
- 2. 5V1A DC Power adapter ----------------------------------------------------------------- 1PC
- 3. Remote control------------------------------------------------------------------------------1PC
- 4. RS232 Serial Cable--------------------------------------------------------------------------1PC
- 5. Operation Manual ------------------------------------------------------------------------- 1PC
- 6. Mounting ears-------------------------------------------------------------------------------2PCS
IV. Specifications
1. Video Bandwidth225MHz[6.75Gbps]
- 2. Input Ports2 × HDMI (Female type)
- 3. Output Ports1 × HDMI (Female type),
- 4. Audio outputPCM2, 5.1, 7.1CH, Dolby 5.1, DTS5.1
- 5. Input Resolution480i60Hz,480p60Hz,576i50Hz,576p50Hz,720p50/60Hz,
1080i50/60Hz,1080p24/30/50/60Hz,800x600@60,
1024x768@60,1280x720@60,1920x1080@60;
- 6. Output Resolution1080p, 720p, 1080i,1024x768,1360x768
- 7. ESD ProtectionHuman Body model:±8 kV (air-gap discharge)
±4 kV (contact discharge)
8. Power Supply 5V/1A DC (US/EU standards, CE/FCC/UL certified)
9. Dimensions70 mm (W)×140mm (D)×25 mm (H)
10. Weight300 g
11. Chassis Material Metal
12. Operating Temperature0 °C~40 °C/ 32 °F~104 °F
13. Storage Temperature −20 °C ~ 60 °C/−4 °F ~140 °F
14. Relative Humidity20~90 % RH (non-condensing)
15. Power Consumption (Max) 10W
- 1. IR: Remote control signal receive.
- 2. SOURCE: Press the button to select the input source as main image, and the LED will indicates the corresponding input source.
- 3. MODE: Press the button to select display mode. See the description 1.
- 4. POSITION: Press the button to select the position of sub image when in PIP mode.
- 5. SIZE: Press the button to select the size of sub image when in PIP mode.
- 6. RESOLUTION: Press the button to select the output resolution.
- 1. Select RS232 COM port.
- 2. Click to connect or disconnect PC and Matrix.
- 3. Select output resolution.
- 4. Click set to confirm.
- 5. Click IN1 or IN2 to select the input source as main image.
- 6. Click the mode Icon to select output mode.
- 7. Click the position Icon to select PIP position.
- 8. Select PIP size and click set to confirm.
- 9. Click to reset to the factory settings.
- 10. Display the FW file path.
- 11. Click to open BIN file(file extension is “.bin”)
- 12. Display the progress of the software upgrade.
- 13. Click to upgrade the Matrix software.
Skype: alinahdcvt
Email:xqchen at hdcvt.com