Parameter 1
Model: BFM-6YB/650ZK
Box size (length, width, height, mm): 650 * 500 * 500
Transition tank size (mm): 218 * 300
Left door opening size (width and height): 255 * 330
Equipment size (mm): 1080 * 570 * 530
Glove hole (mm): φ one hundred and fifty
Vacuum degree: -0.1~0MPa, holding time for 12 hours
Parameter 2
Model: BFM-6YB/850Z
Box size (length, width, height, mm): 850 * 650 * 650
Transition tank size (mm): 273 * 350
Left door opening size (width and height): 360 * 480
Equipment size (mm): 1345 * 715 * 675
Glove hole (mm): φ one hundred and fifty
Vacuum degree: -0.1~0MPa, holding time for 12 hours
Parameter Three
Model: BFM-6YB/850ZK
Box size (length, width, height, mm): 1200 * 700 * 950
Transition tank size (mm): 350 * 400
Left door opening size (width and height): 450 * 600
Equipment size (mm): 1755 * 776 * 1010
Glove hole (mm): φ one hundred and fifty
Vacuum degree: -0.1~0MPa, holding time for 12 hours
A stainless steel vacuum glove box is a laboratory equipment that charges high-purity inert gas into the box and circulates and filters out the active substances inside. Also known as glove box, inert gas protection box, dry box, etc.
Features of stainless steel vacuum glove box:
1. The entire box is made of stainless steel and reinforced with surface spray coating
Plastic, therefore sturdy, corrosion-resistant, and easy to clean;
2. The operation box is faced with tempered glass, with a wide viewing angle and no dead corners;
3. Equipped with lighting fixtures and perforated sockets inside the box, electric furnaces can be used for local heating;
4. The operating gloves are made of acid and alkaline resistant gloves, with reliable and durable sealing: 5. The sealing device is designed with novel design, reliable sealing, and convenient opening;
6. Equipped with water nozzles inside and outside for water inlet and air intake;
7. The two doors of the transition chamber solve the problem of repeatedly vacuuming the main box body
Explosion proof model
Box size (length, width, height, mm)
Transition Tank Size (mm)
Left door opening size (width and height)
Equipment size (mm)
Glove hole (mm)
vacuum degree
BFM-6YB/650ZK
sixty-five
0 * 500 * 500
218 * 300
255 * 330
1080 * 570 * 530
φ one hundred and fifty
-0.1~0MPa
Holding time 12 hours
BFM-6YB/850ZK
850 * 650 * 650
273 * 350
360 * 480
1345 * 715 * 675
φ one hundred and fifty
BFM-6YB/850ZK
1200 * 700 * 950
350 * 400
450 * 600
1755 * 776 * 1010
φ one hundred and fifty
