Specifications
short time photosensitive seal stamp maker1. with very short production time
2. can be made 0.1mm security stripe
short time photosensitive seal stamp maker
photosensitive seal machine use the special materials' photosensitivity, to form a layer of non-penetrating film on the non-imprinting area in stamp seal mat surface. thus it can be used to make stamps.
Advantage
- The product is made convenient ( with very short production time ) ;
- Support row of thousands of times ;
- Printed side do not shrink, without disortion;
- The printing is clear & non-proliferation;
- Persitent does not fade ;
- Continuous fuel injection , continuous use ;
- can be made 0.1mm security stripe.
photosensitive oil
Specifications:
demension: 38*26*9cm
weight:12kg
voltage:220V/50HZ
Energy:1800J
Explosure area: 14cm*8cm
life span: 100,000 times using
number of tube: two pcs
environment: working place to be clean
stamps it made can print logos etc on plastic, glass, copperplate paper and metal
Operation manual:
1. Pull the flat , put the material in turn ,
First , the seal mat;
Second , transpent PVC film ;
Third , the photosensitive photo paper(sulfuric acid paper)with image.
2. pull the flat, clamp the three materials together
then put the flat into the photosensitive seal machine
press red button to turn on the power ,
press the green button when the voltage reach to about 800;
it is done when the laser tube has a twinkle.
Turn off the power.
put the flat into the photsensitive seal machine
press the red button to turn off the power
voltage reach about 800
press the green button for explosure
A stamp is finished. coat the surface with photosensitive oil (let it permeate, coat about 2-3 times ), then you can use it for stamping.