2014 NEW Arrival Hantek DSO8060 60MHz 5-in-1 Handheld Digital Oscilloscope DMM Spectrum Analyzer
Product Description
Excellent Industrial Design .Direct key for Each Channel ,Time base ,Trigger and DMM,easy to operate.
Large 5.7 inch TFT Color LCD Display ,Led backlight,Display clearly.
USB Host/Device 2.0 full-speed interface ,support removeable disk, RS-232/LAN Optional ,Easy to control by PC or long-distance.
Arbitrary Waveform Generator: 25Mz arbitrary waveform output, (sine wave can deliver up to 75 Mz) 200 MSa / s DDS, 12 bits of vertical resolution.High Bandwidth 60MHz-600MHz Oscilloscope ,
and 6000 COUNTS high precision DMM.
High refresh rate,High Real-time Sample Rate 150MS/s-2GS/s, 50GS/s Equivalent-time Sample Rate.
FFT , + , - , * , / ,X-Y, 22 kinds of auto measurements, PASS/FAIL Check ,easy to use on production line.
Multiform Trigger mode ,2 separate Time Base in ALT Trigger mode ,easy to see 2 signal with different frequency.
1000 waveforms save and record.
Battery Power Operation (Installed) Industrial Design.
Save waveform in the following: jpg/bmp graphic file, MS excel/word file.
Dimensions (mm):240(L)x165(W)x50(H), be carried easily.
LabviewVBVC Second Design instance.
Hardware Specification
Specifications:
| Vertical | |
|---|---|
| Channels | 2 |
| Bandwidth, MHz | 60 |
| Rise Time, ns | 5.8 |
| Input Sensitivity | 10mV/div to 5V/div |
| Input Impedance | Resistance 1M |
| Capacitance 15 pF | |
| Input Coupling | AC, DC and GND |
| Vertical Resolution | 8 bits |
| Maximum Input | 300V (DC+AC Peak) |
| Horizontal | |
| Real-Time Sampling Rate | 250MSa/s |
| Equivalent Sampling Rate | 50GSa/S |
| Time Base Range | 5ns/div~1000s/div |
| Memory Depth | 32k at Single Channel, 16k at Dual Channel |
| Time Base Precision | ±50ppm |
| Trigger | |
| Source | CH1, CH2 |
| Mode | Edge, Video, Pulse Width, Alternative |
| X-Y Mode | |
| X-Axis Input | Channel 1 |
| Y-Axis Input | Channel 2 |
| Phase Shift | Max.3 degree |
| Cursors and Measurement | |
| Voltage Measurement | Vpp, Vamp, Vmax, Vmin, Vtop, Vmid, Vbase, Vavg, Vrms, Vcrms, Preshoot, Overshoot |
| Time Measurement | Frequency, Period, Rise Time, Fall Time, Positive Width, Negative Width, Duty Cycle |
| Delay Measurement | Delay time from ch1 rising edge to ch2 rising edge, Delay time from ch1 falling edge to ch2 falling edge |
| Cursors Measurement | Manual, Track, Auto Measure Modes |
| Multimeter Mode | |
| Maximum Resolution | 6,000 Counts |
| Testing Modes | Ac/DC voltage, AC/DC current, resistance, capacitance, diode test, continuity |
| Maximum Input Voltage | AC: 600V, DC: 800V |
| Maximum Input Current | AC: 10A, DC: 10A |
| Input Impedance | 10 MΩ |
| Signal Source Mode | |
| Waveform Frequency | DC~25MHz |
| DAC Clock | 2K~200MHz adjustable |
| Frequency Resolution | 0.1% |
| Channel count | 1CH waveform output |
| Waveform Deepth | 4KSa |
| Vertical Resolution | 12 |
| Frequency Stability | <30ppm |
| Waveform Range | ±3.5V Max. |
| Output Impedance | 50Ω |
| Output Current | 50mA Ipeak=50mA |
| System BW | 25M |
| Harmonic Distortion | -50dBc(1KHz), -40dBc(10KHz) |
| Measure Frequncy Channel | |
| Frequency Range | DC~60MHz |
| Input Range | 400mVpp~18Vpp |
| Coupling Mode | DC |
| Frequency Measurement Accuracy | ±Time Base Error ±1 Count |
| Input Impedance | > 100KΩ |
| General information | |
| Waveform Signal Process | CH1+/- CH2, CH1xCH2, CH1/CH2, FFT, Invert |
| Storage | 15 Waveforms and Setups |
| Display | TFT LCD Type 5.7 Inch with LED Backlight Display |
| Display Resolution | 240 (Vertical) x 320 (Horizontal) Dots |
| USB | USB Host / Device 2.0 Full Speed Supported |
| Optional | RS232, LAN |
| Power Source | AC 100V ~ 240V, 50Hz ~ 60Hz; DC Input: 8.5VDC, 1500mA, Battery Power (Installed) 6 Hours (Li-ion Battery) |
| Dimension | 245 x 163 x 52 mm |
| Weight | 1.2kg |