Specifications
. 100MHz dual channel. ALT MAG function (x10)
. Hold off function
. oscilloscope
CQ5100 - DUAL CHANNEL OSCILLOSCOPE
Features
. 100MHz dual channel
. ALT MAG function (x10)
. Hold off function
. TV synchronization
. CH1 output
. Triggering level lock
. ALT triggering function
. Z axis input
| Technical Data | CQ5100 |
| CRT | |
| Type | 6" rectangle, internalgraticule, 0%, 10%, 90% and 100% marks |
| Display area | 8 x10DIV (DIV=10mm) |
| Accelerating voltage | 1.7kV |
| Intensity and focusing | Continuously adjustable at front panel |
| Trace rotation | Adjusted at the front panel |
| VERTICAL SYSTEM | |
| Sensitivity and accuracy | 5mV / DIV~5V / DIV ±5% 10 calibration steps in 1-2-5 sequence |
| Trimming Ratio | ≥2.5:1 |
| Width of band (-3dB) | DC(AC 10Hz) ~100MHz |
| Rise time | ≤ 3.5ns (CQ5100) |
| Input Coupling | AC, DC, GND |
| Input Impedance | Approx 1MΩ /25pF |
| Max. input voltage | 400V (DC + ACpeak) at 1kHz or less |
| Vertical Mode | CH1, CH2, DUAL ( ALT/CHOP) ADD, CH2 INV |
| HORIZONTAL SYSTEM | |
| Sweep time | 50nS~0.2S / DIV 20 steps in 1-2-5 sequence |
| Sweep accuracy | ±3%, ±10% at x10MAG |
| Trimming Ratio | ≥2.5:1 |
| Sweep magnificaton | x10MAG |
| Max sweep time | 5nS/DIV |
| Linear | ±5%, ±10% at x10MAG |
| ALT-MAG Function | Available |
| ALT separation | Available |
| TRIGGER SYSTEM | |
| Mode | AUTO, NORM, TV, LEVEL LOCK |
| Source | ALT, CH1, CH2, EXT, LINE |
| Polarity | "+" or "-" |
| Trigger sensitivity | INT 1.5DIV (AUTO or NORM ) |
| ext 0.2DIV (AUTO or NORM) | |
| TV sync pulse 2DIV or 0.5V (EXT) | |
| External trigger input | Input impedance: 1MΩ/22pF |
| Max. input voltage: 400V (DC+ACpeak) at 1kHz | |
| X-Y OPERATION | |
| Sensitivity and Accuracy | 5mV~5V/DIV, ±5% 10 calibration steps 1-2-5 sequence |
| Width of band (-3dB) | DC (AC 10Hz) ~1MHz |
| Phase difference | ≤3° (DC ~ 50KHz) |
| Axis Z | |
| Sensitivity | 5Vp-p |
| Polarity | Negative going input increase intensity |
| Input impedance | 10kΩ |
| Usable frequency range | DC~1MHz |
| Max. input voltage | 50V (DC+AC peak) at 1kHz |
| CALIBRATION | Voltage: 2Vp-p±2%, Frequency: 1kHz±2%, Square wave |
| POWER SOURCE | 110~127 VAC±10%, 220~240VAC±10%, 50Hz±2Hz / 60Hz±2Hz |
| ACCESSORIES | Instruction manual x 1, Power cable x 1, Probe x 2 ,Fuse x1 |
| DIMENSIONS & WEIGHT | 310(W) x 140(H) x 400(D)mm, Approx. 8kg |
