1. oscilloscope,Autoscale
2. 8.0inch color LCD display for large view
3. Sample rate:Max up to 2GS/S
4. FFT
Model: PDS8102T
Bandwidth:100M
Sample rate (Real time):1GS/s(500MS for dual channels)
Horizontal Scale(S/div):2ns/div-100s/div,step by 1-2-5
Rise time (at input typical):≤3.5ns;
Channels:Dual channels + external trigger
Display:8.0 inch color LCD,TFT screen,640x480 pixels
Isolation between channel:50Hz(100:1),15MHz(40:1)
Input impedance:1MΩ±2%, in parallel with20pF±3pF
Acquisition modes:Sample, Peak Detect and Average
Probe attenuation factor:1X,10X,100X,1000X
Max. input voltage: 400V(DC + AC PK-PK)
Record length:2M on each channel;
Sampling rate/relay time accuracy:±100ppm
Interpolation:(sin x)/x
Vertical resolution (A/D):8 bit (2 channels simultaneously )
Displacement:±50V(500mv-5V); ±2V(5mv-200mv)
Vertical sensitivity:5mV/div-5V/div(at input)
DC gain accuracy:±3%
Trigger type:Edge, Video,Alternate,Pulse,Slope
Trigger level: ±6 divisions from screen center;
Trigger mode:Auto, Normal, Single
Automatic measurement:Vpp, Vavg, RMS, Frequency, Period, Vmax, Vmin, Vtop, Vbase, Width, Overshoot, Pre - shoot, Rise Time, Fall Time, +Width, -Width, +Duty, -Duty, Delay A B, Delay A B
Waveform Math:+, -- ,×,÷,FFT
Waveform storage:4 waveforms
Communication interface:USB
Power supply: 100V-240V AC, 50/60Hz,CAT
Fuse:1A , T class, 250V
