Fully Auto Pharmaceutical Machinery Capsule Filler Automatic Capsule Pellet Filling Machine

NJP-3 series automatic capsule filling machine Performance:

1, due to poor liquidity for powder filling precision caused by differences in the phenomenon, the aircraft is equipped with forced feeding device, thereby increasing the powder filling precision.

2. It applies to any imports, domestic compliance mechanisms capsule, empty capsule probability of not less than 99.99%, the probability of the charge of not less than 99.95%, the yield of not less than 99.9%.

3, the device control system uses PLC control, man-machine interface, fully functional. When the material shortage and lack of bladder feeding channel fails, automatic alarm, automatic shutdown, display real-time measurement and cumulative production of each piece.

NJP-3 series automatic capsule filling machine Features:

1, the whole appearance, sophisticated technology, simple operation, easy to use.

2, used to increase the working table, ensure the stability of the machine operation (work surfaces than other manufacturers large work surface 90mm). All the contact portion of the drug are made of high quality stainless steel and powder contact portion parts (1), measuring plate SUS316L; (2), the filling lever SUS316L; (3), the upper and lower module SUS316L; (4), hopper SUS304; ( 5), Spatulas, a doctor blade SUS304; (6), seals and other SUS316L.

3, the whole bearings are used in all IKO (Japan), NSK (Japan), SKF (Sweden); electrical appliances are using the German original Siemens; indexer Taiwan Tanzi; although increases manufacturing costs, but greatly improve the life of the equipment and quality.

4, standardization of products, equipment, spare parts can be interchangeable mold replacement convenient and accurate.

NJP-3 series automatic capsule filling machine Product Innovation:

1, a three-dimensional design will fill the base adjustment mechanism to adequately address the problem of leaking powder production project, to avoid the phenomenon of friction between the metering disk and the copper plate, improve its precision highly, extended service life.

 2, the cam aircraft belongs are used Germany DMG six-axis CNC machining centers forming (the only one). The machine adopts Cam transmission section 40C steel surface nitriding treatment, nitriding depth 0.5--1.0mm, HR55-60; cam groove, flat groove cam: 38CrMoAL quenched Gang, surface nitriding treatment, nitriding depth 0.5--1.0 mm, GRC55 ~ 60; pillar: Gcr15 induction hardening depth of 0.7 ~ 1.0mm, HRC55 ~ 60; ensure that the accessories easy to wear.

 3, in order to ensure lubrication and service life of the machine parts, I am in the old equipment on the basis of an additional automatic pump, so that each cam gear has a tubing, for real-time fuel (fuel to Auto , time, frequency and adjustable), eliminating maintenance time (the only one to use).

4, the capsule spout increases the compressor device, effectively solves the problem of the capsule due to electrostatic discharge opening at the discharge port clogging caused in.

5, improved turntable mold design, original Japanese Linear oil-bearing 90, to improve the service life of equipment (other manufacturers turntable bearing only 40, but 50 additional copper sleeve worn installation fast, easy to replace).

6, increase the metering plate design, thereby increasing the dosing plate powder flow uniformity, improved Spatulas mechanism, so that the weighing pan each station and the other end to the loaded amount of consistent, effective control of the amount of difference within ± 3% .

Technical Parameters:

Model: NJP-3-200C

Yield: 12 000 / hour

Weight: 600kg

Machine dimensions: 715 × 805 × 1800mm

Power: 380V 50HZ

Motor power: 1.1KW motor vacuum suction 1.1KW 0.75KW

Holes: 2 hole

Vacuum: 20m³ / h-0.04-0.08Mpa

Vacuum: 17.6Kpa 180m³ / h

Noise: <80DB (A)

On the probability of: empty capsules filled capsules 99.99% 99.95%

Adaptation Capsule: 00,0,1,2,3,4,5 # (optionally a specification)

Load difference: ± 3% - ± 4% 

The main electrical accessories configuration

vacuum cleaner Size:55×42×120cm

Control cabinet size:43×38×142cm

 2000 pcs/ Automatic Capsule Pellet Filling Machine