Sakysteel production of rod is widely used in aerospace, petroleum and petrochemical, thermoelectric power, civilian industry, and other fields, mainly Inconel 625, Inconel 718, Incoloy 825, Hastelloy c - 276...
Inconel 625 | |
| Grade | 625 |
| Diameter Of Alloy bar | Hot Rolled: Φ8-38mm |
| Forging: Φ38-350mm | |
| Cold Rolled: ≤50mm | |
| Standard | ASTM AMSE YB HB BJB GB etc |
| Length | As Required |
| Surface | Black or Bright |
| Manufacture Technology | Hot Rolled ,Forging , Cold Rolled |
| Package | wooden boxes package,pvc package, and other package |
Factory Show
Products Show
Product Stock
Chemical Component
Grade | Ni,Min | Cu | Mo | Fe | Mn | C | Si | S | Cr | Al | Ti | P | V | Nb | Ta | Co | W |
UNS N02200 | 99.0 | 0.25 | - | 0.40 | 0.35 | 0.15 | 0.35 | 0.001 | - | - | - | - | - | - | - | - | - |
N04400(Monel400) | 63.0 | 28.0-34.0 | - | 2.50 | 2.00 | 0.30 | 0.50 | 0.024 | - | - | - | - | - | - | - | - | - |
UNS N06600(Inconel600) | 72.0 | 0.50 | - | 6.0-10.0 | 1.00 | 0.15 | 0.50 | 0.015 | 14.0-17.0 | - | - | - | - | - | - | - | - |
UNS N06601(Inconel601) | 58.0-63.0 | 1.00 | - | Surplus | 1.00 | 0.10 | 0.50 | 0.015 | 21.0-25.0 | 1.0-1.7 | - | - | - | - | - | - | - |
UNS N06625(Inconel625) | 58.0 | - | 8.0-10.0 | 5.0 | 0.5 | 0.10 | 0.50 | 0.015 | 20.0-23.0 | 0.40 | 0.40 | 0.015 | - | Nb+Ta:3.15-4.15 | 1.0 | - | |
UNS N06690(Inconel690) | 58.0 | 0.50 | - | 7.0-11.0 | 0.5 | 0.50 | 0.50 | 0.015 | 27.0-31.0 | - | - | - | - | - | - | - | - |
UNS N08020(Alloy 20) | 32.0-38.0 | 3.0-4.0 | 2.0-3.0 | Surplus | 2.0 | 0.07 | 1.00 | 0.035 | 19.0-21.0 | - | - | 0.045 | - | Nb+Ta:8xC-1.00 | - | - | |
UNS N08028(Alloy 28) | 30.0-34.0 | 0.6-1.4 | 3.0-4.0 | Surplus | 2.5 | 0.03 | 1.00 | 0.030 | 26.0-28.0 | - | - | 0.030 | - | - | - | - | - |
UNS N08800(Incoloy800) | 30.0-35.0 | 0.75 | - | 39.5,Min | 1.5 | 0.10 | 1.00 | 0.015 | 19.0-23.0 | 0.15-0.60 | 0.15-0.60 | - | - | - | - | - | - |
UNS N08810(Incoloy800H) | 30.0-35.0 | 0.75 | - | 39.5,Min | 1.5 | 0.05-0.10 | 1.00 | 0.015 | 19.0-23.0 | 0.15-0.60 | 0.15-0.60 | - | - | - | - | - | - |
UNS N08811(Incoloy800HT) | 30.0-35.0 | 0.75 | - | 39.5,Min | 1.5 | 0.06-0.10 | 1.00 | 0.015 | 19.0-23.0 | 0.15-0.60 | 0.15-0.60 | - | - | - | - | - | - |
UNS N08825(Incoloy825) | 38.0-46.0 | 1.5-3.0 | 2.5-3.5 | 22.0,Min | 1.0 | 0.05 | 0.50 | 0.030 | 19.5-23.5 | 0.20 | 0.6-1.2 | - | - | - | - | - | - |
UNS N06022(Hastelloy C-22) | Surplus | - | 12.5-14.5 | 2.0-6.0 | 0.5 | 0.015 | 0.08 | 0.020 | 20.0-22.5 | - | - | 0.020 | 0.35 | - | - | 2.5 | 2.5-3.5 |
UNS N10276(Hastelloy C-276) | Surplus | - | 15.0-17.0 | 4.0-7.0 | 1.0 | 0.01 | 0.08 | 0.030 | 14.5-16.5 | - | - | 0.040 | - | - | - | 2.5 | 3.0-4.5 |
UNS N10665(Hastelloy B-2) | Surplus | - | 26.0-30.0 | 2.0 | 1.0 | 0.02 | 0.10 | 0.030 | 1.00 | - | - | 0.040 | - | - | - | 1.0 | - |
UNS N10673(Hastelloy B-3) | 65.0 | - | 27.0-32.0 | 1.0-3.0 | 3.0 | 0.01 | 0.10 | 0.010 | 1.0-3.0 | - | - | 0.030 | 0.20 | 0.02 | 0.02 | Ni+Mo:94.0-98.0 | |
Mechanical Properties
Grade | Tensile Strength | Yield Strength | Ductility | HRB |
UNS N02200 | ||||
| Anneales | 379 | 103 | 40 | - |
| Stress-relieved | 448 | 276 | 15 | B65 |
N04400(Monel400) | ||||
| Anneales | 483 | 193 | 35 | - |
| Stress-relieved | 586 | 378 | 15 | B65 |
UNS N06600(Inconel600) | 552 | 241 | 30 | - |
UNS N06601(Inconel601) | 552 | 207 | 30 | - |
UNS N06625(Inconel625) | ||||
| Gr.1 | 827 | 414 | 30 | - |
| Gr.2 | 690 | 276 | 30 | - |
UNS N06690(Inconel690) | 586 | 241 | 30 | - |
UNS N08020(Alloy 20) | 551 | 241 | 30 | - |
UNS N08028(Alloy 28) | 500 | 214 | 40 | - |
UNS N08800(Incoloy800) | ||||
| Annealed | 518 | 207 | 30 | - |
| Cold-Worked | 572 | 324 | 30 | - |
UNS N08810(Incoloy800H) | 448 | 172 | 30 | - |
UNS N08811(Incoloy800HT) | 448 | 172 | 30 | - |
UNS N08825(Incoloy825) | 241 | 586 | 30 | - |
UNS N06022(Hastelloy C-22) | 690 | 310 | 45 | - |
UNS N10276(Hastelloy C-276) | 690 | 283 | 40 | - |
UNS N10665(Hastelloy B-2) | 760 | 350 | 40 | - |
UNS N10673(Hastelloy B-3) | 760 | 350 | 40 | - |
Our Certifications
Why choose us?
Q1:How many coutries you already exported ?
A1:Exported to more than 30 countries mainly from America, Russia, UK, Kuwait, Egypt, Iran, Turkey, Jordan, etc.
Q2:How can I get some samples?
A2:Small samples in store and can provide the samples for free. Catalgue is available, most patterns we have ready samples in stock. Customized samples will take about 5-7days.
Q3:Do you have any MOQ limit for alloy products order?
A3: Low MOQ, 1pc for sample checking is available
Q4. How do you ship the goods and how long does it take to arrive?
A: We usually ship by DHL, UPS, FedEx or TNT. It usually takes 3-5 days to arrive. Airline and sea shipping also optional. For mass products, ship freight is prefered.
Q5:How does your company do regarding quality control?
A5:Mill Test Certificate is supplied with shipment. If needed, a Third Party Inspection is acceptable or SGS.
Q6:Is it OK to print my logo on products??
A7: Yes. OEM and ODM are available for us.
How Can contact us ?
We sincerely welcome you to our company have a visit!