4 Handpiece In 1 Machine Vacuum + 940nm Near-Infrared Laser + Bipolar RF + Rollers
Detailed Product Description
Cellulite Removal Ultrasonic Cavitation Machine Infrared Laser 940nm With CE , GOST-P
Description:
1. CE,TUV,EMC,LVD,SGS Certificate approved;
2. Vela shape and Aluma in 1 salon equipment;
3. Remove both eyelids wrinkle,slimming
4 Handpiece In 1 Machine Vacuum Liposuction Cellulite Reduction Wrinkle Removal CE
Applications:
1. Intensive physical biolysis to remove fat
2. Excess fat cell melted, Body circumference reduction
3. Body slimming, Body contouring, Body Shaping
4. Cellulite reduction, Massage
5. Skin tightening, Eyelid Area Treatment
6. Smooth fatigue, Wrinkle removal
7. Remove obstruction from channels and collaterals
8. Promote and accelerate the body's metabolism
Interface | 10.4" TFT Chromatic Touch Screen |
Output power | 2000W |
Vacuum | 650mmHg |
Pump flow rate | 60L/min |
Freezing temperature | -10 °C~5°C |
Fat exploding frequency | 35-40K |
Cooling device output pressure | 0-100Kpa |
Working mode | Continous vacuum and Cryo (cooling) |
Electrical requirement | AC 220V±10% 50HZ/AC 110V±10% 60HZ110V |
Pressure output | 0-900Kpa |
Operating voltage | 110V/220V ± 10%, 50/60Hz, 12A |
Machine Features:
5 Technologies in one machine — Ultrasonic Vacuum + 940nm Near-Infrared Laser + Bipolar RF + Endermology + Rollers
Ultrasonic Vacuum System
We adopts 40KHz Ultrasonic Vacuum to cause the air bubbles around fat membranes to break up, stimulated and then metabolized out of human body by lymphatic system,. It has a perfect treatment result for weight losing.
940nm Near-Infrared Laser System
This technology is the treatment manner which surgeons like most. 940nm light is not visible and only can be seen with camera. When the laser paddles are placed on the skin, the cold red laser beams penetrate the skin and just deep enough to reach the layers of fat. When the light hits the fat cells, a rapid chain of events takes place. Firstly, change cell permeability and released. The water, Glycerol and fatty acids move into the interstitial space beneath the fatty layer in the skin. Then further water, fatty acids and Glycerol spill out. The fat cells are therefore reduced in size and start to reorganize.
Bipolar RF System
Bipolar RF makes water molecules in the fat revolve with high speed to produce friction and shock, then triglyceride go out from fat. RF energy with 1-10M could get to 4-15mm skin depth, which makes every layer get heat evenly. The new collagen makes skin turn tighten. This Bipolar RF make the reorganizing fat cells connect more closely, stimulate the collagen re-grow, avoiding flabby skin after slimming treatment.
Endermology + Rollers System
Use Rollers to massage the skin, can promote local blood circulation,
accelerate fat metabolism, make cellulite more closely.
Transverse heated so that the role of depth is more uniform, reliable safety, make eyes face no longer become operation area.
Treatment Principle:
940nm Infrared laser reduces skin impedance by heating skin and RF energy penetrates deeply into connective tissue;
The synergistic combination of infrared laser and conducted Bipolar RF energies increase the oxygen intracellular diffusion by heating the skin Vacuum plus specially designed rollers manipulate leads RF penetration to be even 5-15mm. At the same time, Cavitation, Endermology and Rollers mechanical tissue manipulation nips and stretches fibrillar connective tissue, effectively breaks down subcutaneous fat as well as extruded capillary vessel, Increase lymphatic drainage, promotes metabolism and reduces or shrinks the size of the actual fat chamber and greatly improved body contouring effect;
The technology that vacuum folds skin makes RF energy penetrate a specific folded skin, greatly improve effect and safety, even for the upper eyelid area treatment.
After-sale serive
Guarantee: We offer 3 years free warranty, lifetime maintain, 24 hours calling service.
Service: There is OEM&ODM service for distributor.
Training: After you get the machine, there is user manual, maintain manual, training CD guide you to operate the machine.
Factory picture
Customer Visit :
Contact Information :
Vini (General market manager )
Skype:lisa.huate
Mobile/Whatsapp/Viber : 86 185-1133-1139
WeChat: Cn135526
Company Address: Room 1801, Unit 2, Building 9, HUATUOLU 1 Street, Daxing District, Beijing, China.
Factory Address: No.7,Jinguang Road ,Liangxiang Industrial Development Zone,Fangshan,Beijing ,China