Delivery Time:7-15days
Certification:ISO
Outdoor Waterproof Flexible LED Strip Light RGB Color IP68 for Stairway Lighting
Description:
Specifications:
US-F3528-60I Series Silicone tube encased and Epoxy glue injected waterproof IP68
Dimension: 5000*10*3mm
LED Chip: 3528 SMD TOP LED
Material: FPC + Silicone tube encased and Epoxy glue injected
FPC color: Yellow, White, Black
Emitting color: Red, Yellow, Blue, Green, warm white, cool white
Working Voltage: DC12V / DC24V
LED Quantity: 60pcs/meter, total 300pcs
Rated Power: 4.8W/m
Beam Angle: >120°
Life Span: ≥50000 hrs,
Working Humidity: 10%~95%
Protection Degree: IP68
Working Temperature: -25℃~55℃
Packaging: 5m/roll
|
Part No. |
Color |
Descrip. |
Size(L*W) |
Watt |
Led Q’ty |
Volt |
Packing |
IP |
|
US-F3528R-60I |
Red |
3528LED |
5000*10mm |
4.8W/m |
60led/m |
12V |
5m/roll |
IP68 |
|
US-F3528Y-60I |
Yellow |
|||||||
|
US-F3528B-60I |
Blue |
|||||||
|
US-F3528G-60I |
Green |
|||||||
|
US-F3528WW-60I |
WW |
|||||||
|
US-F3528W-60I |
White |
3528 SMD LED Strip dimension (unit: mm)
Strip Connection:
To cut and seal at one end, please follow the steps: A1 A2 A3 B1 B2
To cut and install waterproof connector at one end, please follow the steps: A1 A2 A3 C1 C2 C3 C4 C5
A1: Cut the light strip at the mark ”scissors” or by every 3 LED\'s.
A2: Screw to open the glue cap.
A3: Use the thrust (another side of glue cap) to puncture the surface.
B1: Inject the silicon gel into the end cap without holes.
B2: Push the strip into the cap and let gel dry for 1 hour.
C1: Put the connector wire through the end cap holes.
C2: Solder the wire onto the PCB.
C3: After solder the two wires, push the strip into the end cap with wires carefully.
C4: Inject the silicon glue at the end of strip and cap.
C5: Make sure end cap and strip are connected well and let gel dry for 1 hour.
Accessories:
Connectors are necessary if you want to connect the cut sections together or connect a section to power. (Connector of strip to strip and connector of strip to power are both available)
Installation:
Connectors are necessary if you want to connect the cut sections together or connect a section to power. (Connector of strip to strip and connector of strip to power are both available)
Package:
250meters/50rolls packed in one carton
Carton size: 52 x 26 x 28 cm
Applications:
1) Architectural decorative lighting
2) Archway, canopy & bridge edge lighting
3) Amusement park, theater & aircraft cabin mood lighting
4) Emergency hallway lighting
5) Auditorium walkway lighting
6) Stairway accent lighting
7) Concealed lighting
8) Backlighting for signage letters
9) Channel letter lighting
10) Cove lighting
