1, Voltage: AC 220V-240V 50-60HZ
2, Electric Current: 8A/250V
3, Power: 1500W
4, Pre-Heating Time: 4Min
5, Smoke Output: 20000cuft/min
6, Tank Capacity: 1.3L
7, DMX Channel: 10CHs
8, LED Quantity: 10x 8W LEDs RGBW
9, Spraying ways: Vertically and horizontally
| DMX Channels For 1500W LED Moving Head Fog Machine | ||
| Channel 1 | Fog | 0-9 OFF,10-255 ON/ the output volume of smoke gradually become larger |
| Channel 2 | Red | 0-9 OFF,10-255 ON / the become lighter |
| Channel 3 | Green | 0-9 OFF,10-255 ON /green become lighter |
| Channel 4 | Blue | 0-9 OFF,10-255 ON/blue become lighter |
| Channel 5 | Yellow | 0-9 OFF,10-255 ON/Yellow become lighter |
| Channel 6 | Color mixing | 0-9 OFF,10-255 ON/Color Mixing |
| Channel 7 | Strobe | 0-9 OFF,10-255 ON/LED dimmer become faster |
| Channel 8 | Dimmer | 0-9 OFF ,10-255 ON/LED become lighter |
| Channel 9 | X-axis control | 0-255corresponds to 0-540 degree |
| Channel 10 | Y-axis control | 0-255corresponds to 0-270 degree |
1.Connect the DMX controlling line ,open the base of the fixture ,and remove the oil tank to add fluid ,carefully not to exceed the mark on the tank to prevent oil from spilling out,and then press the cap down and check tightly ,finally place the oil tank back carefully and cover it .
2. If you need to use fixture upside down, just put machine upside down and remove the tank ,put the tank upside down and then re-inserted into the base.
3. Plug in the power cord ,turn on the power switch ,then oil bottles displaying in red is in heating ,set address code, waiting for about seven minutes ,When the machine is well heated ,oil bottles will be displayed in blue ,the LCD display can also be observed to understand the heating state of the machine .
4.Promote push rod of the console ,the machine will begin to spray, the pump may emit shaking sound in the first smoke slowly ,Which is a normal phenomenon.
5. Different ways of using several pieces together :picture one :using build-in oil bottle ;picture two :connect the machine with any outside oil bottle ;picture three :using the oil filler ;no need to fill the fluid in the height ,suitable for being used in the high place and long-term using .
6. The oil can be supported in the vertical height of about 10m.The distance between the filler and the first machine can not be more than 15 m(in vertical state).The length of oil pipes among the latter fixtures can reach 20m in horizontal state .
7. One filler can provide oil for 4-6fixtures and the address code of the filler and other moving head machine should be the same.
Our factory:
1. Payment Terms?—— We accept payment by bank transfer (T/T) , Western Union,Paypal; payment should be paid before delivery .
2. Shipment Way?——You can choose to use sea shipment or air freight or express by DHL or such as this(ups,fedex,TNT,ems,aramex).We can help you to book ship or arrange the shipment, or you can use your own shipping agent.
3. Warranty?—— For each order, we provide one year limited warranty, within the warranty time we can provide repair parts or you can ship the products back, we will repair and ship back to you.
4.Delivery time?——Sample order will be shipped out 3-5 days after got your payment ,Large order depend on quantity .we welcome even 1 sample order for Sharpy 200w 5R Beam Moving Head Light ,don´´t worry about sample order ,many sample orders make big order in our factory.
5.Logo or Package with Logo?——We can put your logo on the products and manual book for each order, but if you want to use the package in your logo, the MOQ is 100pcs for each model.
Guangzhou Kiya Lighting Co.,LTD is specialized on professional stage equipment. We were focused on the research and development of the moving head series and led series.The accumulation of talents, technology is the strong background of the continuous development of any enterprise. KIYA based on the purpose of: details, standard, profession, progress and perfection, we never stop our steps of becoming a strong, comprehensive an outstanding enterprises.