Solid Tungsten Carbide Parts T.C. Guide Roller for Wire Rods ring guides
Features of Tungsten carbide wire guide
Carbide wire guide is made of tungsten carbide for its extremely hard and wear-resistant features, with sophisticated equipment for precision grinding and polishing, coupled with advanced production and processing technology, the inner and the outer diameter of the hole and tolerance R at less than 0.01mm, the surface roughness over the trough reached Ra 0.025 and above, it requires high hardness, smooth surface in use to reduce injury and other enameled wire.
Application:
Tungsten carbide wire guiding rollers are widely used in steel Industry for guiding steel/iron wire with its high impact strength and wear resistance,various dimensions are available in our factory,your specific enquiry will be more than welcome.
Free smaple was available!
Main Grade for With Tungsten Carbide dies - Tungsten carbide wire guide/offline
Grade No. | Density (g/cm3) | HRA | T.R.S (Mpa) | Application |
YG3X | 14.9 | ≥91.5 | ≥1300 | For drawing non-ferrous metal wire and stainless steel wire etc. |
YG6 | 14.8 | ≥90.0 | ≥2150 | For drawing steel wire and stainless steel wire etc. |
YG6X | 14.8 | ≥92.0 | ≥1860 | For drawing nonferrous metal wire, steel wire, stainless steel wire. Good wear resistance and high toughness.. |
YG8 | 14.8 | ≥89.5 | ≥2320 | For drawing steel wire, stainless steel wire. Good general performance. |
YG11 | 14.4 | ≥88.5 | ≥2420 | For fabricating drawing dies of steel tubes and rods under high compressibility ratio; punching, stamping, forging tools under large stress. |
ZhuZhou HongTong Tungsten Carbide Co., Ltd., located at Liyu Industrial Park, Zhuzhou National High-tech Development Zone, is a high-tech joint-equity enterprise integrating R&D, production and marketing of cemented carbide series products.
The company sets up an independent production and R&D base, covering a total area of 7,000m2 and a plant area of 4,000m2. There is a group of experienced technical personnel and a staff of 80 people including 5 engineers, 8 assistant engineers, and 29 people having college degree or above. The company mainly produces cemented carbide drawing dies, cold heading dies, mining tools, sealing rings, and other nonstandard products, wherein the cemented carbide drawing dies and cold heading dies take a leading position in the industry, and the bore of wire-drawing die can be minimized to 0.1mm, deeply popular with customers.