Specification:
Plastic air tight container mold
Long mold life
Good part design and mold design
Competitive prices
Plastic air tight container mold detailed in following :
Cavity/Core Material | P20, 718,2738,H13,DIN1.2311,DIN2344 |
Product Raw Material | PP |
Cavity | Single cavity |
Cycle Time | 30S |
Runner System | Hot runner, Cold runner |
Finish | Good Polishing |
Mold Guarantee | More than 500,000SHOTS |
Mould standard | HASCO, DME, or by requested etc. |
Software | CAD, Pro-E, UG, Solidwork |
Tolerance | ± 0.02mm |
Main Technique | Milling, Grinding, CNC , Engraving ,EDM, Wire-cutting etc. |
Packing | Wooden Case |
1.Quote | According Sample or 2D/3D drawing or Picture with detailed information , If the part some design is not good , we will give suggestion and solutions to customer |
↓ | |
2.Discussion | Mold material, cavity number, price, runner, payment, etc. |
↓ | |
3.Approved | Order confirmed |
↓ | |
4. Advance | Pay 50% by T/T |
↓ | |
5.Product Design Checking. | We will send 2D and 3D part drawing and PPT file for customer check |
↓ | |
5.Mould Design | According the Approved Part drawing , we will make the mold design and send to customer confirm |
↓ | |
6.Mold Steel Material and Component Prepare | After drawing confirmed , we will start to prepare the steel material and standard components |
↓ | |
7.Mold Processing | Send detailed reports with pictures to customer each week |
↓ | |
8.Mold Testing | Send Test samples with report to customer |
↓ | |
9. Mold Modification | According to customer’s feedback |
↓ |
|
10.Balance settlement | 50% by T/T after the customer approved the test sample and mould quality. |
↓ |
|
11.Packing and Delivery | Each Mold will be packing with some damageable spare parts , and send detailed pictures to customer |
Q/C Inspect Moulds:
1.Mould Material Q/C
- Mould Steel Checking(Hardness, Crack ,Blow hole material defects )
- Mould Standard Spare Parts Checking(hardness, size, flaw checking)
2. Mould Machining Process Q/C
- Design checking (Part design, mould design,Including 2D drawing and 3D drawing)
- Each part of mould’s size checking after machining according to 2D drawing
- Mold Test (check mould running conditions and T1 samples)
3.Make sure to follow and checking each points of customer’s request before shipment