Specifications
1.There is an arc to make the wires enters to the workaround conveniently.2.The metals come about plastic deformation.
Details of drawing dies:
We can produce all kinds of wire drawing dies, natural diamond dies, synthetic diamond dies, Tungsten carbide dies; high crystal dies. Any size and request can be available.
Single crystal diamond dies
Natural Diamond dies
PCD dies
Manufacture scope: 0.02-2.6mm
Glomerocryst diamond dies
Manufacture scope: 0.05-25mm
Reduction Angle for Different Material, Size:
Area Reduction |
Area Reduction | Copper Al Alloy | Stainless steel Copper Plated Steel |
5-8 | 0.01-0.049 | 11° | 10° |
8-11 | 0.05-0.099 | 13° | 11° |
11-16 | 0.10-0.499 | 15° | 13° |
16-22 | 0.50-2.499 | 17° | 15° |
22-35 | 2.50-8.0 | 19° | 17° |
Diamond Type | Blanks Code | Application Size(mm) | Standard Tolerance | Standard Casing(mm) | ||
ADDMA Code | Import Code | |||||
Natural Diamond Dies |
| 0.04 | +0 0.00004 | 25×6 | ||
0.04 0.059 | +0 0.00005 | 25×8 | ||||
0.06 0.39 | +0 0.001 | 25×8 | ||||
0.40 0.79 | +0 0.002 | 25×10 | ||||
0.08 2.50 | +0 0.003 | 25×12 | ||||
PC Diamond Dies
| D - 6 | C | 0.05 0.50 | +0 0.001 | 25×8 | |
D 12 | S | 0.30 0.90 | +0 0.002 | 25×10 | ||
D - 15 | B | 0.50 -1.50 | +0 0.002 | 25×12 | ||
D - 18 | A | 0.80 2.30 | +0 0.003 | 25×12 | ||
D - 21 | M | 1.60 3.20 | +0 0.004 | 25×15 | ||
D - 24 | L | 2.60 4.20 | +0 0.005 | 25×15 | ||
D - 27 | I | 3.80 5.50 | +0 0.010 | 25×24 | ||
D - 30 | H | 4.80 7.60 | +0 0.010 | 25×24 | ||
D - 33 | X | 6.00 9.80 | +0 0.015 | 60×28 | ||
D - 36 | Y | 8.00 20.0 | +0 0.20 |
| ||
1. Structure of the dies:
The hole of the wire drawing dies is made up of four parts:
(1) Lubricating area of the entry: There is an arc to make the wires enters to the workaround conveniently.
(2) The workaround: The metals come about plastic deformation while drawing, the cross section of the metals is compressed and reduced.
(3) Diameter fixed district: to guarantee the size and form accurate and even, lengthen the service life of the die.
(4) Wire outlet area: wire outlet terminal can prevent scuffing and break-up when the machine is stopped.
2. Material source:
The die materials imported from U.S.A. GE Company. Each one has trade marks and certificate of competency. Granularities are 351025.
3. The production and delivery will takes 15 days
4. Usage time: the whole set of dies can guarantee drawing 30000 tons of copper wires. It can reduce the copper powder in the course of drawing. The surface of finished wires is smooth without any defect. After the dies drawing copper wires of 30000 tons, it will not be damaged, but it needs to safeguard, maintain, and polish.
