Model | 1219-8406 | ||||||
Norminal Battery Voltage (Volts | 36 - 48V | ||||||
2 Minute Current Rating (amps) | 600 | ||||||
Throttle Type | 0-5K Ω | ||||||
CURTIS 1219-8406 programmable motor speed controllers provide efficient, cost-effective, and simple-to-install control for a variety of large industrial vehicles. Typical applications include walkie/rider pallet trucks, fork lifts, stackers, reach trucks, and other industrial trucks. The 1207-based microprocessor logic section combined with a CURTIS MOSFET power section gives the 1219-8406 controller high power and advanced features in a rugged, compact package.1219-8406 controllers are flexible in variable applications, with the added functionality of being programmable-via the CURTIS Model 1313-4431 Handheld Programmer or 1314 PC Programming Station. This means the controllers can be tailored to the needs of specific applications. In addition to configuration flexibility, use of the programmer offers diagnostic and test capability.
Specifications:
PWM operating frequency: 15 kHz
Electrical isolation to heatsink (min.): 500 VAC
KSI input voltage: 16–45V
KSI input current (no contactors engaged):
80 mA without programmer
130 mA with programmer
Logic input current: < 2 mA
Status LED output current (max.): < 2 mA
Operating ambient temperature range: -40°C to 50°C
Storage ambient temperature range: -40°C to 85°C
Key Features:
CURTIS Model: 1219-8406 (HELI forklift controller model: DQKC-025)
Norminal Battery Voltage (Volts): wide working voltage 36 - 48V
2 Minute Current Rating (amps): 600
Under Voltage Cutback (Volts): 21V
Contactor Voltage (Volts): battery voltage
Throttle Type: 0-5K Ω (throttle type "3", default setting), flexible throttle circuitry accommodates a variety of throttle types: 5kΩ–0, 0–5kΩ, 0–5V, 0–10V, inductive, Hall, etc.
Ambient Operating Temperature Range: -40°C to 50°C
Heatsink Overtemperature Cutback: 85°C
Heatsink Undertemperature Cutback: -25°C
Dimensions: L309xW180xH82 mm
Features Include:
Power MOSFET design, providing
infinitely variable drive and plug brake control
silent high-frequency operation
high efficiency (for reduced motor and battery losses)
Overvoltage and undervoltage protection
Thermal protection/compensation circuitry that provides undertemperature cutback, constant current limit over operating range, and linear rollback in overtemperature-thus preventing sudden power loss regardless of thermal conditions
Diagnostic and test information for the controller-and other system components-readily available through both an on-board LED and the optional handheld programmer
Meets or exceeds EEC fault detect requirements, with circuitry and software to detect faults in the throttle circuit, MOSFET drive circuits, MOSFET output, contactor drivers, and contactors
Programmable input sequencing options include several combinations of neutral start and static return to off (SRO)
Arless contactor switching with microprocessor-controlled contactor sequencing
Smooth, controlled plug braking-with either variable (throttledependent) or fixed plug current limit
Neutral braking option provides automatic plug braking in neutral
MultiMode™ input selects between two different operating modes, thus allowing optimization of vehicle characteristics for different driving conditions
Emergency reverse (belly button switch) provides full function with a single input
Anti-rollback (ramp start) provides full power for starting on ramps
Simple contactor and switch wiring, with coil drivers monitored for shorts and open circuits-thus ensuring fail-safe operation
Flexible throttle circuitry accommodates a variety of throttle types: 5kΩ–0, 0–5kΩ, 0–5V, 0–10V, inductive, Hall, etc.
Programmable "ramp shape" (static throttle map) provides flexibility in selecting throttle response feel
Sealed package, providing environmental protection
Power connections made by tin-plated solid copper busses, with a polarized Molex connector for control signals
Easily programmable through the CURTIS Model 1313-4431 Handheld Programmer or 1314 PC Programming Station.
Rugged anodized aluminum extruded housing meets IP65 environmental sealing standards for use in harsh environments
Hefei Huanxin Technology Development Co., Ltd. has been devoting ourselves to developing and manufacturing and other since 2004. We are located in Hefei, Anhui Province, with convenient transportation access. We employ over 101 - 200 People staff members. We have achieved great improvement since our company was founded in 2004. We abide by the motto of Firstclass quality, Reasonable price, Best service and Professional product support.
Package: Normally we use the standard exporting packaging. We also can according to clients' request .
1. By Couriers: DHL, UPS, FEDEX, TNT are the main courier companies we are cooperating.
2. By Air: Delivery from the Shanghai airport to customer's destination city air port.
3. By Sea: Delivery from the Shanghai sea port .
our service
1. OEM Manufacturing welcome: Product, Package...
2. Sample order3. We will reply you for your inquiry in 24 hours.
4. after sending, we will track the products for you once every two days, until you get the products. When you got the
goods, test them, and give me a feedback.If you have any questions about the problem, contact with us, we will offer
the solve way for you.