Curtis DC Motor Programmer 1244-6661 48V/84V Controller Used For Industrial Vehicles
Overview :
CURTIS 1244 MultiMode™ controllers are separately excited motor speed controllers designed for use in a variety of material handling vehicles. These programmable controllers are simple to install, efficient, and cost effective. Typical applications include low lifts, stackers, fork lifts, reach trucks, personnel carriers, counterbalance trucks, order pickers, boom trucks, and other industrial vehicles.
The 1244 MultiMode™ controller offers smooth, silent, cost effective control of motor speed and torque. A four quadrant, full-bridge field winding control stage is combined with a two quadrant, half-bridge armature power stage to provide solid state motor reversing and regenerative braking power without additional relays or contactors. The 1244 controller can also be specified to be compatible with CAN Bus communication systems
Specifications:
- CURTIS Model: 1244-6661
- Norminal Battery Voltage (Volts): 72V (default setting), 84V, 60V or 48V
- Amature Current Limit (amps): 600
- Amature 1 Minute Current Rating (amps): 600
- Amature 1 Hour Current Rating (amps): 140
- Field 2 Minute Current Rating (amps): 50
- PWM operating frequency: 16 kHz
- Electrical isolation to heatsink (min.): 500 VAC
- KSI input current (no contactors engaged):
- 160 mA without programmer
- 200 mA with programmer
- Logic input voltage: >7.5 V High; <1 V Low
- Logic input current: 10 mA
- Operating ambient temperature range: -40°C to 50°C
- Heatsink overtemperature cutback: 85°C
- Heatsink undertemperature cutback: -25°C
- Package environmental rating: IP64 / IP67
Picture:
Feature Include:
- Full-bridge field and half-bridge armature power MOSFET design, providing
- infinitely variable forward, reverse, drive, and brake control
- silent high frequency operation
- high efficiency
- Regenerative braking, providing longer operation on a single battery charge and reducing motor brush wear and motor heating
- Programmability through the 1313-4431 Handheld Programmer or 1314 PC Programming Station
- Complete diagnostics through the programmer and the internal Status LED
- Two fault outputs provide diagnostics to remotely mounted displays
- Continuous armature current control, reducing arcing and brush wear
- Automatic braking when throttle is reduced from either direction; this provides a compression braking feel and enhances safety by automatically initiating braking in an operator hands off condition
- Deceleration Rate, Load Compensation, and Restraint features prevent downhill runaway conditions; speed is controlled to within approximately 20% of level surface value
- MultiMode™ allows four user-selectable vehicle operating personalities
- Programmable to match individual separately excited motor characteristics
- Meets or exceeds EEC fault detect requirements
- Vehicle top speed is controlled and limited in each mode
- Linear temperature and undervoltage cutback on motor currents; no sudden loss of power under any thermal conditions
- High pedal disable (HPD) and static return to off (SRO) interlocks prevent vehicle runaway at startup
- Creep speed adjustable from 0% to 25% in each mode
- Continuous diagnostics during operation, with microprocessor power-on self-test
- Internal and external watchdog circuits ensure proper software operation
- Programmable coil drivers provide adjustable contactor pull-in and holding voltages
- Hour-meter enable output is active whenever the controller is providing motor current
- Optional Electromagnetic Brake Driver provides automatic control of an electromagnetic brake or other similar function
- Optional Reverse Signal Driver provides a low signal any time the vehicle is driving or braking in reverse
- Optional Auxiliary Driver provides a low signal to power an auxiliary contactor or other similar function
- Driver outputs are short circuit protected and provide built-in coil spike protection
- Controller is programmable to provide throttle control of motor speed, applied motor voltage, or motor torque
Package: Normally we use the standard exporting packaging. We also can according to clients' request .
1. By Couriers: DHL, UPS, FEDEX, TNT are the main courier companies we are cooperating.
2. By Air: Delivery from the Shanghai airport to customer’s destination city air port.
3. By Sea: Delivery from the Shanghai sea port .
Hefei Huanxin Technology Development Co., Ltd. has been devoting ourselves to developing and manufacturing and other since 2004. We are located in Hefei, Anhui Province, with convenient transportation access. We employ over 101 - 200 People staff members. We have achieved great improvement since our company was founded in 2004. We abide by the motto of Firstclass quality, Reasonable price, Best service and Professional product support.
Q1. Can I have a sample order?
A: Yes, we welcome sample order to test and check quality.
Q2. What about the lead time?
A: Sample needs 3-5 days.
Q3. Do you have any MOQ limit?
A: Low MOQ, 1pc for sample checking is available
Q4. How do you ship the goods and how long does it take to arrive?
A: We usually ship by DHL, UPS, FedEx or TNT. It usually takes 3-5 days to arrive. Airline and sea shipping also optional.
Q5. How to proceed an order?
A: Firstly let us know your requirements or application.
Secondly We quote according to your requirements or our suggestions.
Thirdly customer confirms the samples and places deposit for formal order.
Fourthly We arrange the production.
Q6. Is it OK to print my logo on the product?
A: Yes. Please inform us formally before our production and confirm the design firstly based on our sample.
Q7: Do you offer guarantee for the products?
A: Yes, we offer 1 year warranty to our products.
Q8: How to deal with the faulty?
A: Our products are produced in strict quality control system and the defective rate will be less
than 0.2%.
Please feel free to contact us if you have any problem.:)