AM110W-O laboratory Stirrer adopts no carbon brush dc motor drive, suitable for laboratory of low to medium and high viscosity liquid toss to combine. Compact machine has the reasonable structure, low noise, no maintenance, stirring speed controlled by microprocessor, instantly effective compensation because of load change and the power supply voltage fluctuation caused by the change of speed, constant speed and reliable. Built-in automatic overload protection device, ensure the safe run continuous high load for a long time in the experiment. Transmission mixing chuck and expand all kinds of the experimental application of stir bar function. Figures show that stirring speed, to guarantee the experimental data intuitive acquisition. Stir stepless speed regulation, and meet the experiment for the stirring speed at any time. The stability of the stirring speed, competent for high viscosity medium, the mixing of slurry.
Technical parameters:
Type: AM110W-O
Rated voltage: AC110-220V
Rated frequency: 50/60Hz
Device applied voltage: DC24V
Input power: 162W
Output power: 110W
Drive type: Brushless DC motor
Stirring shaft output torque: 13.0 N.cm
Stirring shaft output peak torque: 38.0 N.cm
Work mode: S1 (continuous)
Operating state display: OLED
Operating control mode: combined control knob
Speed adjusting range: 30-2000RPM
Speed control type: stepless
Timing control range: 1-6000min
Speed dynamic detection: YES
Speed memory function: YES
Overload protection function: YES
Stirring shaft fixed way: quick clamp
Clamping range: Φ2-10mm
Stirring shaft penetrate diameter(stop): Φ10mm
Stirring impeller configuration:Three blades spiral impeller
Stirring capacity : 25L
Stirring processing viscosity: 100000mPa.S
Allow environment temperature: ≤40℃
Allow relative humidity: ≤80%
Protection grade: IP 40
Size: 360 * 260 * 760mm
Net Weight: 7.6kg
Gross weight: 9.0 kg
.The machine within one year from the date of purchase, the problem caused by the quality of the product itself,Our company will be responsible for the warranty.
.As a result of user improper use or artificial damage,Our company does not undertake any responsibility and associated maintenance costs.
.The warranty of the machine must have a warranty.
.The unit to remove the internal structure or removed the company indicated in the instruction manual disassembly of parts will be seen as artificial damage is prohibited.
.The machine more than warranty period, the maintenance fee shall be borne by the users themselves.