2015 ointment emulsifier mixer
Product Description
1. INTRODUCTION OR MULTIFUNCTIONAL VACUUM MIXER
Planetary mixer is a high-efficient and multi-functional mixing machine. It is widely used for making Silicone sealant, Cream, Cosmetics, Nail polish and other viscosity liquid and paste material.
1. There are two motors, one for high-speed mixing, one for low-speed mixing, which ensure the materials can be totally mixing, dispersing and shearing in the mixing tank.
2. It will equipped with Hydraulic discharge machine for discharging the material.
3. It can be equipped with vacuum system, heating system as required.
Usage of multifunctional vacuum planetary mixer:
1. Cosmatic: Hair Dyes, Nail Polish, Mascara, Liquid Foundation, Blusher, Foundation Cream, etc.
2. Glue: Silicone Sealant, RTV, liquid silicone rubber , etc.
3. Food: Chocolates, etc.
2. TECHNICAL PARAMETER OF MULTIFUNCTIONAL VACUUM MIXER
MODEL | VOLUME (L) | MOTOR POWER (KW) | STIRRING SPEED (RPM) | VACUUM DEGREE (MPA) | REMARKS | |
REVOLUTION | ROTATION | |||||
XJB-6 | 6 | 1.5 | 0-60 | 0-100 | -0.098 | The data in this table is only for reference, the actual data can be designed as the detailed requirements of the products (material viscosity, heating temperature and other requirements). |
XJB-20 | 20 | 3 | 0-60 | 0-100 | ||
XJB-60 | 60 | 5.5 | 0-60 | 0-100 | ||
XJB-100 | 100 | 7.5 | 0-60 | 0-100 | ||
XJB-200 | 200 | 15 | 0-60 | 0-80 | ||
XJB-350 | 350 | 22 | 0-60 | 0-80 | ||
XJB-600 | 600 | 37 | 0-60 | 0-80 | ||
XJB-1000 | 1000 | 45 | 0-60 | 0-80 | ||
XJB-1500 | 1500 | 55 | 0-60 | 0-80 | ||
XJB-2000 | 2000 | 75 | 0-60 | 0-80 | ||
1) Lifting mode: Hydraulic lifting. 2) Heating or Cooling can be designed as required. 3) The pressure range: -0.1~0.3Mpa. 4) Speed control mode: inverter for frequency control. | ||||||
3. PICTURES OF MULTIFUNCTIONAL VACUUM MIXER
4.Usage of Planetary mixer:
5.Packaging&Shipping:
6.FAQ:
Q: Can you send the formula for the products we want to make?
A: Our machines can be used for many kinds of product making, such as Resin, Paint, Adhesive, Cosmetic, Food, Chemicals. There are many kinds of these products, so it's impossible for us to know all the formulas and technologies. We can assist you to find the raw material list you need, and after you place order with us, we can help you to find formula and technology, there will be engineers to teach you how to make the product, and the cost will be on your account.
Q: Do you have machines in stock?
A: Yes, but just the small-scale machines. Machines are different with other products, most of the large-scale machines are designed according to our customers' requirements, different customers have different production requirements, so the technical parameter is different for most machines. On the other hands, most of the our machines will cover a large area, so once the machines are finished, we will effect shipment after QC.
Q: Can you send the detailed drawings of the machine to us before we place order?
A: We can send you a draft drawing of the machines, and after you place order and pay the deposit, our engineer will design the specific technical parameters fo you and send you the detailed drawings. Once you confirm without questions, we will put it into production.
Q: Why does it take at least 20 days to finish the machine?
A: Once receipt the deposit from you, we will design the drawings and make out the list of the materials and accessories for the production. Once the drawings are finished, our workers will start the production, from welding, polishing, assembling, debugging, detection and so on. After finish, they need time to check the machines, if found any possible defect parts, they will return to the production until every part is 100% approved.
Q: Can we pay the balance after we receive the machines and test without problems?
A: It's unnessary to worry about the quality of our machines, we are confident in that. After the machine is finished, we can install and test the machine for you (if you can not come to our factory, we can record a vedio and send to you). Only after you check without problems, we will effect shipment.
Q: If you price is higher than the suppliers for the products that are not made by you?
A: We can provide the whole production lines, which include many facilities and accessories(like Oil furnace, steam boiler, etc). It's impossible for us to make everyone of them, because we just make the main machines. However, based on our great reputation in the business, and also considering our huge sourcing quantity by collecting the orders from domestic and foreign customers, and our strong cash flow to pay the suppliers in advance. We can get the best offer from the suppliers. So after adding an reasonable profit for the outsourcing facilities and accessories (like Oil furnace, steam boiler, etc), we still can offer a very competitive price similar to our suppliers, or even lower in some case.
7.Company Information:
About us:
1)The company build in 2006, now there are about 50 people work for it.
2)Our credo is: JCT —— your truthful partner in China.
We are strive to become the leader in this industry and produce the world-class mixing equipment.
3)Our products including reactor, kneader, planetary mixer, power mixer etc, and can be used for resins, adhesives, paint, sealants and powder mixing etc.
4)Our products have exported to Ethiopia, Saudi Arabia, Japan, India, Russia, Sudan, Italy etc.
WHY CHOOSE US :
Professional Sales Team & Technology Support & Strict Processing Workshop
8.Some of Our Clients& Certificates:
Contact Information:
[CHOOSE WHAT YOU NEED AND CONTACT US AT ANY TIME!]
Tel:0086-1 813 837 3960
QQ:2108375241
Click here to learn more about our products and company details: http://fsjct.en.china.cn/
2015 ointment emulsifier mixer
ointment emulsifier mixer