Specifications
melt adhesive kneader , vacuum type, discharge by tilting tank by hydraulic
No. | Model | NHZ-500 melt adhesive kneader |
1 | Total capacity | 600 L |
2 | Heating way | Oil heating ,pressure ≤0.6MPa |
3 | Power of main motor | 30KW/AC380V/50Hz |
4 | Main reducer | 2SH7-22.4-B(Boneng Transmission) |
5 | Type of blade | Sigma Type |
6 | Material of blade | ZG270-500, welding SUS304 surface |
7 | Material contact to material | SUS304 |
8 | Speed of main shaft(front/rear) | 38/26rpm ( adjustable in this interval) |
9 | Distance between blade and vessel | ≤3 mm |
10 | Distance between blade and vessel end | ≤3 mm |
11 | Sealing of main shaft | PTFE |
12 | Discharging way | Tilt vessel by hydraulic cylinder,angle of tilt Approx.95° |
13 | Open lid | By hydraulic cylinder , opening angle approx 75° |
14 | Close lid | By manual |
15 | Nozzles on big lid | Custom-made, buyer should provide the location and size of the nozzles |
16 | Sealed stripe on lid | Fluorine rubber |
17 | Hydraulic station | YZLE40 |
18 | Motor power of hydraulic station | 2.2kW |
19 | Limit vacuum | ≤-0.09 MPa |
20 | Vacuum pump | SK-2 |
21 | Speed of bleeding air | 2m3/min |
22 | Temperature measuring | PT100 platinum resistor |
23 | Overall dimension | Approx 2800×1800×1800 |