Function
Swing feeder,we can also called it weigh feeder, is widely used in chemical industry, metallurgy, construction, mineral processing, coal and other industries,especially for ore dressing line, will block the material from the storage silo sent by the device. It is fit for feeding small particle materials in ore bin, especially fit for the feeding process of ball mill with belt conveyor. Swing feeding machine is able to deliver blocky and granular materials from storage silo to receiving device evenly, regularly and continuously in the production process.
Characteristics
feeder cable clamp is suitable for concentrating coal chemical industry and other departments, It can supply the materials to various set of accepting the material from the store chute by the filter. The bottom feeder mod is not suitable for delivering the dry power of the too big material or otherwise, it may appear the fly-ash pollution or the jam of the output.
| Specifications | |||||||||
| Model | Feeding inlet | Max feeding size | Stroke of Eccentric Wheel | Speed (r/min) | Capacity | Power (kw) | Weight | ||
| BF300*300 | 300*300 | 30 | 0-90 | 1390 | 6.5 | 0.75 | 0.272 | ||
| BF400*400 | 400*400 | 35 | 0-170 | 1400 | 12 | 1.1 | 0.558 | ||
| BF600*600 | 600*600 | 50 | 0-200 | 1400 | 25 | 1.5 | 0.613 | ||
| BF800*800 | 800*800 | 50 | 0-250 | 1400 | 30-50 | 5.5 | 1.055 | ||
The capacity refers to limestone, professing capacity may vary with different materials and feeding sizes. | |||||||||
Working Principle
When the electromotor is started, its power is transmitted to the reducer for reducing the speed through the V-shaped belt. The reduced power is transmitted to the eccentric gear with adjustable eccentric distance (the adjustment of the feeding amount needs to adjust the position of the eccentric gear) and the eccentric gear drives the baseboard of the pendulum to move back and forth like an arc through the connecting rod, so that the feeding mouth will open and close repeatedly. The rocks in the ore storage bin above the feeder machine are fed in from the feeding mouth and then evenly discharged from the machine to make sure the ball mill is evenly fed in with materials.
We offer you the early planing of the project,the best process flow design,choose the best appropriate equipment model to design products according to your special needs.
All productds have to pass strict inspection with the drawings and process flow according to the contract before
they go out.We assigned the technicians to the producing spot to provide installation guide, testing and training.
After-sale:Considerate
To establish good business relationship,we adopt periodical visit to the users.We could give you the definite reply during 24 hours when the users meet some problems in the producing process.
Q: Payment?
A: 30% by TT as deposit on signing the contract, 70% by as final payment of balance after the client’s satisfactory inspection of the weigh feeder prior to the goods leaving the factory.
Q: What about Warranty? And what will we do if the machine is broken down?
A: The warranty period for all of structural and mechanical feeder cable clamp is one year. The warranty period for all electric motors is half one year. Wear parts are not covered by warranty unless the component part is found to be flawed.
Q: What should we need to do for if we want to get a best quotation?
A: Hi, if you want us recommend a suitable type for you, please let us know the details as follows:
1) The capacity (tons per hour ) do you need?
2) The size of the raw materials and the size of the finished products?
3) What's your main raw materials?(soft orhard materials? water content?)
Q: What could you help me to do for the business?
A: Many thanks for your trust, we can provide you with proposal chart for complete production lines, spot inspection and operator traning according to your demands and the conditions of applied spot, we can help you choose the right bottom feeder mod, drilling rig, loader, trucks, excavators and so on for rotary washer for sand washing.
Q: Delivery time?
A: Standard delivery time for stationary weigh feeder is 30 days from receipt of deposit, the mobile crusher plant is 45 days.