Purposes of shaking table
Shaking table is one of the important equipment of beneficiation. It is widely used in the selection of tungsten, sn, molybdenum, plumbum, zinc, niobium and other rare metals and precious metal ores, but also can be used for the selection of iron, manganese ore and coal.
Construction of shaking table
Head Motion The head motion is of rugged construction and requires minimum maintenance. Its internal mechanism is splash lubricated from an integral oil sump.
Decks The decks are built of 16 mm zircon-reinforced fiberglass with fabricated steel frames at the bottom and are easy to clean, requiring little maintenance. The specific gravity of fiberglass made into decks is one third of that of steel, while its strength reaches as high as 70% that of steel. This fiberglass desks also has the characteristic of water-resistance and corrosion-resistance and can hold the shape unchangeable at ±50°C.
Feed and Water Box A wooden feed distributing box with hopper and a long water box are attached to the iron of the deck, giving a very even distribution of feed and water.
Base A choice of ordinary type, groove steel support or big channel steel support is available.
Technical parameters of shaking table
| Name | Coarse Sand Bed Surface | Fine Sand Bed Surface | Slime Bed Surface | |
| Bed Surface Size | Length (mm) | 4450 | 4450 | 4450 |
| Drive End Width (mm) | 1855 | 1855 | 1855 | |
| Concentrate End Width(mm) | 1546 | 1546 | 1546 | |
| Maximum Feed Size (mm) | 2 | 0.5 | 0.15 | |
| Feed Quantity (t/h) | 30-60 | 10-20 | 15-25 | |
| Feed Concentration (%) | 25-30 | 20-25 | 15-25 | |
| Route (mm) | 16-22 | 11-16 | 8-16 | |
| Frequency ( t/s) | 45-48 | 48-53 | 50-57 | |
| Bed Surface Transverse Slope(degree) | 2.5-4.5 | 1.5-3.5 | 1-2 | |
| Separation Area (m2) | 7.6 | 7.6 | 7.6 | |
| Bed Surface Section Shape | rectangle | sawtooth | triangle | |
| Electric Power (kw) | 1.1 | 1.1 | 1.1 | |
| Drive Type | Eccentric connecting rod mechanism | |||
Pictures of shaking table
