1400-4000 Gauss Iron Sand Wet Magnetic Separator:
Wet magnetic separator separate magnetic materials from non-magnetic materials by the difference of mineral magnetic coefficient and the machine magnetic system and mechanical drive. It widely used in the separation processing of ferrous metals and magnetic materials.
Magnetic Separator Structure :
Permanent magnetic separator mainly consists of such four parts as cylinder, magnetic system, cell and transmission parts.
Magnetic Separator Applications :
Wet magnetic separator is the commonly used separator in ore dressing plants, which is applicable to separate strong magnetic minerals.
Magnetic separator Working principle:
The pump enters into the mining area of the cell though ore box with the force of water flow. Magnetic particles form into magnetic ball or linkage with the force of magnetic field. The magnetic ball and linkage are absorbed on the drum during they are moving towards magnetic pole with the magnetic force. When the magnetic ball and linkage are rotating with the moving drum, because of alternating polarity and magnetic stirring, the gangue and other non magnetic ore mixed in magnetic ball and linkage is fall down, while magnetic ball and linkage are absorbed on the surface of the drum. These are concentrates we need. The concentrates come to the field where the magnetic is the weakest with the rotating drum. Then they fall in to concentrate slot by the water flow. But the full magnetic roller uses brush roll to discharge ores. At last, the non-magnetic or weak magnetic minerals are discharged out of the cell with plump.
Magnetic Separator Features:
1: Simple structure and easy to maintain
2: Short magnetic circuit
3: Little magnetic flux leakage
4: High magnetic intensity, low energy consumption
5: Fine beneficiating result
6: The drum is made from thick stainless steel for long service life.
