Zhengzhou Huahong Machinery Equipment Co., Ltd.
Huahong Sand Making Machine application
Sand Making Machine is mainly used in secondary crushing, and can crush material of crushing compression strength no more than 320 Mpa. It is suitable to produce high rank highway, hydroelectric and building material.
Sand Making Machine working principle
Sand Making Machine crushes materials with impact force. When the materials enter the blow bar area, they are crushed due to the high-speed impact of the blow bar and are thrown to the impact plates on the rotor for secondary crush. Then the materials will be shot back to the blow bar again for the third crush. This process repeats until the materials are crushed to the required size and discharged from the lower part of the machine. The size and shape of the finished powder can be changed by adjusting the gap between the impact rack and rotor support. The machine employs self-weigh security device in its back frame. When other objects enter the impact cavity, they will be forced out of the machine by the impact rack in the front and back of the machine.
Technical parameters
model | Feeder Opening mm | Feeding Size mm | Output size mm | Output size mm | Capacity t/h | Motor (kw) | ||
Clinker | limestone | Siliceous sand | ||||||
800×400 | 400×185 | 120 | ≤5 | 5-20 | 20-30 | 30-45 | 35-45 | 22-37 |
800×600 | 500×250 | 180 | ≤5 | 5-20 | 35-40 | 40-55 | 45-55 | 37-45 |
800×800 | 550×330 | 180 | ≤5 | 5-20 | 35-45 | 60-65 | 55-65 | 37-45 |
1010×1010 | 1000×350 | 180 | ≤5 | 5-20 | 45-55 | 60-75 | 65-75 | 45-55 |
1200×1000 | 1200×400 | 180 | ≤5 | 5-20 | 80-110 | 80-100 | 80-100 | 90-110 |
1200×1200 | 1200×450 | 180 | ≤5 | 5-20 | 100-110 | 90-100 | 90-120 | 110-132 |
1400×1400 | 1500×500 | 190 | ≤5 | 5-20 | 100-150 | 100-150 | 120-150 | 160 |
1600×1600 | 1600×550 | 190 | ≤5 | 5-20 | 170-210 | 190-250 | 190-250 | 250 |
1800×1800 | 1800×800 | 190 | ≤5 | 5-20 | 250-270 | 280-310 | 280-310 | 280 |
