Cement mill is the key equipment for re-crushing the materials after they are primarily crushed. The cement mill is a new generation ball mill with high efficient and low cost which we self-developed with the introduction of the advanced European technology.
Applications: Cement mill is widely used for the dry type or wet type grinding of all kinds of ores and other grindable materials in cement, silicate product, new building material, refractory, fertilizer, black and non-ferrous metals and glass ceramic industry.
Technical Data:
Model | Shell rotation speed (r/min) | Ball load (t) | Feeding size (mm) | Discharging size (mm) | Capacity | Motor power (kw) | Weight (t) |
Φ900*1800 | 36-38 | 1.5 | ≤20 | 0.075-0.89 | 0.65-2 | 18.5 | 5.5 |
Φ900*3000 | 36 | 2.7 | ≤20 | 0.075-0.89 | 1.1-3.5 | 22 | 6.7 |
Φ1200*2400 | 36 | 3 | ≤25 | 0.075-0.6 | 1.5-4.8 | 30 | 12 |
Φ1200*3000 | 36 | 3.5 | ≤25 | 0.074-0.4 | 1.6-5 | 37 | 12.8 |
Φ1200*4500 | 32.4 | 5 | ≤25 | 0.074-0.4 | 1.6-5.8 | 55 | 13.8 |
Φ1500*3000 | 29.7 | 7.5 | ≤25 | 0.074-0.4 | 2-5 | 75 | 16.8 |
Φ1500*4500 | 27 | 11 | ≤25 | 0.074-0.4 | 3-6 | 110 | 21 |
Φ1500*5700 | 28 | 12 | ≤25 | 0.074-0.4 | 3.5-6 | 130 | 25.8 |
Φ1830*3000 | 25.4 | 11 | ≤25 | 0.074-0.4 | 4-10 | 130 | 29 |
Φ1830*4500 | 25.4 | 15 | ≤25 | 0.074-0.4 | 4.5-12 | 155 | 35.5 |
Φ1830*6400 | 24.1 | 21 | ≤25 | 0.074-0.4 | 6.5-15 | 210 | 43 |
Φ1830*7000 | 24.1 | 23 | ≤25 | 0.074-0.4 | 7.5-17 | 245 | 43.8 |
Φ2100*3000 | 23.7 | 15 | ≤25 | 0.074-0.4 | 6.5-36 | 155 | 34.8 |
Φ2100*4500 | 23.7 | 24 | ≤25 | 0.074-0.4 | 8-43 | 245 | 42 |
Φ2100*7000 | 23.7 | 26 | ≤25 | 0.074-0.4 | 8-48 | 280 | 56.6 |
Φ2200*4500 | 21.5 | 27 | ≤25 | 0.074-0.4 | 9-45 | 280 | 51.8 |
Φ2200*6500 | 21.7 | 35 | ≤25 | 0.074-0.4 | 14-26 | 380 | 60 |
Φ2200*7000 | 21.7 | 35 | ≤25 | 0.074-0.4 | 15-28 | 380 | 62 |
Φ2200*7500 | 21.7 | 35 | ≤25 | 0.074-0.4 | 15-30 | 380 | 64.8 |
Φ2400*3000 | 21 | 23 | ≤25 | 0.074-0.4 | 7-50 | 245 | 58 |
Φ2400*4500 | 21 | 30 | ≤25 | 0.074-0.4 | 8.5-60 | 320 | 69 |
Φ2700*4000 | 20.7 | 40 | ≤25 | 0.074-0.4 | 12-80 | 380 | 94 |
Φ2700*4500 | 20.7 | 48 | ≤25 | 0.074-0.4 | 12-90 | 480 | 102 |
Φ3200*4500 | 18 | 65 | ≤25 | 0.074-0.4 | --- | 630 | 137 |
Φ3600*4500 | 17 | 90 | ≤25 | 0.074-0.4 | --- | 850 | 158 |
Φ3600*6000 | 17 | 110 | ≤25 | 0.074-0.4 | --- | 1250 | 175 |
Φ3600*8500 | 18 | 131 | ≤25 | 0.074-0.4 | 45.8-256 | 1800 | 252 |
Applications: cement, silicate product, new building material, refractory, fertilizer, black and non ferrous metals and glass ceramic industry.
Production and assemblying site:
Spare parts applied:
1. Good lubrication, long lifespan;
2. Good bearing capacity;
3. High density, less waste;
4. High efficiency and energy saving;
5. Simple structure, easy to maintenance;
6. Easy to operate and widely application
Materials spirally and evenly go into the first cabin of the ball mill through the hollow shaft from the feeding device, and inside the cabin, there are ladder liners or ripple liners in which there are steel balls with different specifications. The cylinder rotates and produces centrifugal force, bring the balls to a certain height, and then the steel balls fall down to impact and grind the materials. After coarsely ground in the first cabin, the materials go into the secondary cabin through the single-layer partition board and in which there is flat linears; there are steel balls in the lining board to further grind the material. Finlly the powders will be discharged from the discharged from the discharging grating bar.
Mining products we supply:
Customer visit:
Welcome to contact and visit us.