Grinding mill with wheels/gold wet pan mill
of Highest performance
Instruction :
This kind of machine is named after the diameter of roller.Φ1300, Φ1350, Φ1400,
Φ1500, and Φ1600 are suitable for selection of iron, molybdenum ore, lead ore,
Zinc ore, antimony ore and so on. Φ850, Φ900, Φ1000, Φ1100, and Φ1200 are
suitable for selection of gold ore.The machine can be used in the line of ore dre
ssing,such as the gold,as we all know, the gold is always contained in the natural
mineral,then the machine can be used to dress them out.
Features :
Firstly,the operation is simple and the investment of the machine is not large,as a
result,the rate of return is high;Secondly,the occupation is small,you can take a s
uitable space to work on dressing;Thirdly,it is energy saving and environment frie
ndly, as the power is small and the machine won’t make out smoke and any ot
her pollution.Above all, the machine is the most suitable and ideal for medium and
small sized enterprises.
Working Principle:
Grinding mill with wheels is made of restructuring on the basis of conventional mac
hine, For the traditional machines, the work piece is large and lifetime is short , elec
trical power is large, installation cycle is long, so it can not be immediately put into
production, maintenance and it also needs large lifting equipment to replace materials.
Technical Parameters :
Model | Specification | Input size(mm) | Rotate Speed (r/min) | Powder(kw) | Weight(t) |
1600A | 1600×400×200×500±20mm | 30mm | 20-22 | 25KW | 14.5 |
1500A | 1500×350×200×460±20mm | 20-22 | 22KW | 13.5 | |
1500B | 1500×350×150×460±20mm | 20-22 | 22KW | 12.3 | |
1500C | 1500×300×150×420±20mm | 20-22 | 22KW | 11.3 | |
1400A | 1400×250×150×350±20mm | 16-18 | 18.5kw | 8.5 | |
1400B | 1400×250×150×350±20mm | 21-23 | 18.5kw | 8.5 | |
1350A | 1350×250×150×350±20mm | 16-18 | 18.5kw | 8 | |
1350B | 1350×250×150×350±20mm | 21-23 | 18.5kw | 8 | |
1300A | 1300×250×150×350±20mm | 16-18 | 15kw | 7.5 | |
1300B | 1300×250×150×350±20mm | 21-23 | 15kw | 7.5 | |
1200A | 1200×200×80×250±20mm | 17-19 | 7.5kw | 5.5 | |
1200B | 1200×200×80×250±20mm | 23-25 | 7.5kw | 5.5 | |
1100A | 1100×200×80×250±20mm | 17-19 | 7.5kw | 5 | |
1100B | 1100×200×80×250±20mm | 23-25 | 7.5kw | 5 | |
1000 | 1000×200×80×250±20mm | 13-15 | 5.5kw | 4.5 |
Operation :
1.Before putting the raw materials into the machine, you must make sure that the ma
-chine has been checked for norma working.
2.If the machine is stopped,such as power cut,the material laying in the machine before
-should be cleaned out.
3.The frequency of feeding material should be stable,the frequency going up and dow
-ning is not allowed.
5.Check all the bolts regularly to make sure that the bolts are tight.
6.If the bearing parts are damaged,they should be taken place by new ones immediately.
7.When the machine is working, you should pay attention whether there’s abnormal so
-unds or high temperature,if it happens,you should stop and check in time.
8.While checking or repairing the machine,you should take out the V-belts.
Delivering Pictures Presention:
About Our Company:
Henan Dongfang Group is a manufacture factory.The factory has very rich experi
ence as it has a history of more than ten years. The factory covers more than 60,000
square meters,180 sets of gold processing equipment,more than 1,000 employees,and
our factory .Our factory has a history of more ten years and our technology is mature ,
because it is nearly several decades,so we are enough to be trusted.We have mature
technology and best service.
Welcome to visit our factory and patronize for our common development creating brilliancy!
This is our factory,Dongfang Group,and the workshop.You're welcome to visit our
factory.
Contract Us:
HENAN DONGFANG MACHINERY Co., Ltd.
Contact: Helen Zhao
Skype: dfmachine01
Tel: 0086-371-67668877 / 67944555
Fax: 0086-371-67944555
If you have any problems. Please feel free to contact us.
You're warmly welcome to visit our factory
Our website: http://hndongfang.en.china.cn/