Gold ore grinding machine/wheel mill for
gold of Stable
Instruction :
Gold ore grinding machine is also called wet grinding machine. It is praised by users
because of it has the features of low investment, high production capacity, low cons
umption, good efficiency, easy installation and maintenance. It is an excellent equipm
ent ,which can replace ball mill.
Features :
Gold ore grinding machine is mainly through the mixing of raw materials, rolling, crus
hing, rolling repeatedly to reach moisture equilibrium, the ratio of uniform, low gas co
ntent, to increase molding and molding quality, grind the material through the machine
molding products,It has a high density, strength, and no porosity ratio. Energy efficient,
high output, the product is used for iron ore tailings recovery process, not slag the loss,
the effective resources can be fully utilized.
Working Principle :
Gold ore grinding machine is made of restructuring on the basis of conventional machine,
For the traditional machines, the work piece is large and lifetime is short , electrical power
is large, installation cycle is long, so it can not be immediately put into production, mainte
-nance and it also needs large lifting equipment to replace materials.
Technical Parameters :
Model | Specification | Input size(mm) | Rotate Speed (r/min) | Powder(kw) | Weight(t) |
1600A | 1600×400×200×500±20mm | 30mm | 20-22 | 25KW | 14.5 |
1500A | 1500×350×200×460±20mm | 20-22 | 22KW | 13.5 | |
1500B | 1500×350×150×460±20mm | 20-22 | 22KW | 12.3 | |
1500C | 1500×300×150×420±20mm | 20-22 | 22KW | 11.3 | |
1400A | 1400×250×150×350±20mm | 16-18 | 18.5kw | 8.5 | |
1400B | 1400×250×150×350±20mm | 21-23 | 18.5kw | 8.5 | |
1350A | 1350×250×150×350±20mm | 16-18 | 18.5kw | 8 | |
1350B | 1350×250×150×350±20mm | 21-23 | 18.5kw | 8 | |
1300A | 1300×250×150×350±20mm | 16-18 | 15kw | 7.5 | |
1300B | 1300×250×150×350±20mm | 21-23 | 15kw | 7.5 | |
1200A | 1200×200×80×250±20mm | 17-19 | 7.5kw | 5.5 | |
1200B | 1200×200×80×250±20mm | 23-25 | 7.5kw | 5.5 | |
1100A | 1100×200×80×250±20mm | 17-19 | 7.5kw | 5 | |
1100B | 1100×200×80×250±20mm | 23-25 | 7.5kw | 5 | |
1000 | 1000×200×80×250±20mm | 13-15 | 5.5kw | 4.5 |
Operation :
1.Before putting the raw materials into the machine, you must make sure that the
machine has been checked for norma working.
2.If the machine is stopped,such as power cut,the material laying in the machine
before should be cleaned out.
3.The frequency of feeding material should be stable,the frequency going up and
downing is not allowed.
5.Check all the bolts regularly to make sure that the bolts are tight.
6.If the bearing parts are damaged,they should be taken place by new ones imme
-diately.
7.When the machine is working, you should pay attention whether there’s abnor
-mal sounds or high temperature,if it happens,you should stop and check in time.
8.While checking or repairing the machine,you should take out the V-belts.
Delivering Pictures Presention:
About Our Company:
Henan Dongfang Group is a manufacture factory.The factory has very rich experi
-ence as it has a history of more than ten years. The factory covers more than 60,
-000 square meters,180 sets of gold processing equipment,more than 1,000 emplo
-yees,and our factory .
This is our factory,Dongfang Group,and the workshop.You're welcome to visit
our factory.
Welcome to visit our factory and patronize for our common development creating brilliancy!
Contract Us:
If you want to know more about us and our production,please contract us,and we'll
be very glad.
HENAN DONGFANG MACHINERY Co., Ltd.
Contact: Helen Zhao
Skype: dfmachine01
Tel: 0086-371-67668877 / 67944555
Fax: 0086-371-67944555
If you have any problems. Please feel free to contact us.
You're warmly welcome to visit our factory
Our website: http://hndongfang.en.china.cn/