CNC gantry machining center is usually for making medium and large parts, and it is widely used in shipping building industry, wind energy industry, aviation industry, to make some parts like motors, blades, beam, molds and gear box.
| Item Model | Unit | TY-SP1502 | TY-SP1502B | TY-SP1503 | TY-SP1503B |
| table size(WxL) | mm | 1200×2100 | 1200×2100 | 1200×3000 | 1200×3000 |
| X-axis travel | mm | 3000 | |||
| Y-axis travel | mm | 1650 | |||
| Z-axis travel | mm | 800 | |||
| size of machine | mm | 1650 | |||
| spindle nose to table | mm | 175~975 | 115~915 | ||
| table-T-slot | mm | 7-22×150 | |||
| spindle taper | mm | BT50/Φ190 | |||
| spindle gear | rpm | highest speed 3000rpm | |||
| spindle drive ZF reduction | rpm | highest speed 6000rpm, drive ratio 1:1 ; 4:1 | |||
| spindle straight transfer | rpm | highest speed 6000rpm | |||
| XYZ-axis ball-screw size | mm | 6310x5010x5010 | |||
| X-axis rail size | mm | double“V”slide rail | heavy duty roller rail 55 | ||
| Y-axis rail size | mm | heavy duty roller liner guide 55MM | |||
| Z-axis rail size | mm | rectangle slide rail | |||
| X/Y/Z axis rapid feed | m/min | 12x20x12 | 20x20x12 | ||
| three axis working rapid speed | mm/min | 1-8000 | |||
| positioning accuracy | mm | ±0.015 | |||
| repeat positioning accuracy | mm | ±0.003 | |||
| control system | / | MITSUBISHI/FANUC/SIEMENS | |||
| spindle motor | kw | 22 | |||
| X-axis servo-actuator | nm | 40 | |||
| Y-axis servo-actuator | nm | 30 | |||
| Z-axis servo-actuator | nm | 30 | |||
| pneumatic source requirement | Kg/Cm2 | 6 | |||
| table load capacity | kgs | 5000 | |||
| power consumption | kva | 45 | |||
| weight(approx) | kgs | 29500 | |||
We reserve the rights on the designing, colors, specification and termination of use of our products. Changes to these factors will not be notified. | |||||
| Standard accessaries | Special accessaries | ||||
| 1,full closed guard(without top cover) | 1, deep honing Coolant thru tool holder device | ||||
| 2,column postposition carrier | 2,CNC rotatry table | ||||
| 3,Double oil hydraulic cylinder balance system | 3,Electrical box air-conditioning device | ||||
| 4,Oil-water separator | 4,Optical Scale ffedback system | ||||
| 5,Cutting fluid cooling system | 5,High pressure coolant thru spindle | ||||
| 6,Double spirals type chip conveyer | 6,Cutting fluid automatic system | ||||
| 7,Crawler type chip removal/ debris collector car | 7,Automatic tool length measurement systems | ||||
| 8,Working light and daylightlamp | 8,Automatic work-piece measurement systems | ||||
| 9,Program end alarm light | 9,oil-pressure clamping auto 90°lateral milling head | ||||
| 10,water cannons and air gun for cleaning | 10,oil-pressure clamping maunal 90°lateral milling head | ||||
| 11,Rigid tapping | 11,lengthening milling head | ||||
| 12,RS232C port | 12,gear type milling head | ||||
| 13,Portable hand wheel | 13,milling head with five faces | ||||
| 14,Spindle cooling system | 14,Erect milling head | ||||
| 15,Electrical box heat exchanger | 15,manual Universal milling head | ||||
| 16,foundation pad and balance adjustment pad | 16,straight transfer milling head | ||||
| 17,One set of tool and adjustment box | 17,ZF speed reducer+straight transfer milling head | ||||
| 18,Operation and maintenance instructions | |||||
| 19,automatic power turn-off device | |||||
| 20,precision check report | |||||
| 21,System Operation and maintenance instructions | |||||
| 22,Outside varying voltage(220/380V) | |||||
| 23,Manual/program spindle debris device | |||||
| 24,Central lubricating system | |||||
a. Free installation and debugging
b. Free operator training
c. Free maintenance within 1 year
d. Long warranty and technology support
a. 30% Deposit by TT before production and 70% payment by TT before shipment;
b. 30% deposit by TT before production and 70% L/C at sight before shipment;
c. 100% L/C at sight.
1. The Reasons For Choosing us:
a.Free installation and debugging
b.Free operator training
c.Free maintenance within 1 year
d.Long warranty and technology support
2.High Quality
The main parts of our machines are imported from Japan,Germany and USA.Some are made in Taiwan.
You are welcome to visit our factory.
3.Low Price
We make sure that for same price,our quality is much more excellent.
If you need more detailed information,please feel free to contact me as following:
Yangyang.Niu
Trademanager: cn1513256925
Skype: yangyang.niu