Construction factory used wire straightening and cutting machine
| Brief description | Used wire straightening and cutting machine is used to straightening galvanized wire or rebar,and then cut it into the needed length.It can do a prepare work for the wire mesh welding machine.So it is widely accepted to the factory who is dealing wire wires and wire mesh.Also widely used in construction area. |
| Advantage &Feature | 1.Different lengths and numbers are remembered by the machine; 2.Hydraulic cut off, high accuracy but low noise; 3.Covering Less Space,convenient to move and install ; 5.Alter number and length without shutting; |
| Technical parameter of used wire straightening and cutting machine | |||
| Model | GT4-10 | GT4-12 | GT6-14 |
| Straightening Dimension | Φ4-Φ10mm | Φ4-Φ12mm | Φ6-Φ14mm |
| Wire Traction Speed | 25-30m/min | 45m/min | 55m/min |
| Wire Cut Lengths | 100-2500mm(can add) | 800-9000mm(can add) | 800-8000mm(can add) |
| Cutting Length Error | 0 | ±1mm | ±15mm |
| Wire Straightening Degrees | ±2mm/m | ±2mm/m | ±2mm/m |
| Traction Motor | 7.5KW | 2.2KW-6P | 4KW-6p |
| Straightening Motor | 7.5KW-4P | 11KW-4P | |
| Cutting Motor | 4KW-4P | 4KW/5.5kw-4p | |
| Voltage | 220V/380V/415V/440V,50/60HZ,single or double or three phase | ||
| Whole Weight | 140kg | 1300kg | 2000kg |
| Overall Dimension | 2250x450x1000mm | 2100x800x1100mm | 2700×800×1200mm |
| Technical parameter of used wire straightening and cutting machine | ||||
| Model | GT1-3 | GT2-5 | GT3-6 | GT4-8 |
| Straightening Dimension | Φ1-Φ3mm | Φ2-Φ5mm | Φ3-Φ6mm | Φ4-Φ8mm |
| Wire Traction Speed | 25-30m/min | 25-40m/min | ||
| Wire Cut Lengths | 100-3000mm(can add) | 100-3000mm(can add) | ||
| Cutting Length Error | 0 | 0 | 0 | 0 |
| Straightening Motor | 1.5KW | 2.2KW | 3KW | |
| Cutting Motor | 0.75KW | 0.75KW | 1.1KW | |
| Voltage | 220V/380V/415V/440V,50/60HZ,single or double or three phase | |||
| Whole Weight | 150kg | 160kg | 160kg | 200kg |
| Overall Dimension | 1100*450*1100mm | 1400*550*1200mm | ||
Zhengzhou Ellsen is a manufacturer focousing on design, production,sales and sales service.
At present,our factory professional manufacture bar bending machine,bar cutting machine,stirrup bending machine,straightening cutting machine,wrought iron machine. Our products have been exported to USA, Australia, England, Russia,India, Pakistan, Bengal, Philippine, Australia, Malaysia, etc,more than100 countries and regions. Quality first and customer first is our forever aim. Every machine with high strict quality control and commissioning before delivery, any question about the machine use and maintenence in use will be attentioned within 24 hours. Welcome you to be our new client!