Specifications
1.Low noise ,reasonable structure , convenient operation.2.Suitable for all kinds of forging works.
Description:
1.Powered by compressed air,to meet the needs of production safety efforts percussion and vibration frequency can be controlled by adjusting the air pressure.
2.Use of high-strength cast iron,light weight,small size.
3.Mechanism is simple,easy to operate.
The principle of work:
Motor through reduction gear and crank rod driven compression cylinder compression piston moves up and down to produce compressed air.
When the compression cylinder upper and lower airways to the atmosphere,the compressed air does not enter the cylinder,motor idling,
hammer does not work,the handle or lever or pedal down rotary valve,the compressed air into the working cylinder of the upper or lower,
to promote working piston moves up and down,so as to drive the hammer and iron on rise or fall,complete a variety of hit actions.
55kg separate main technical data
Item | Unit | MODEL NO. | |
Weight of falling parts | kg | 55 | |
Maximum blow energy | J | 700 | |
Distance from center of die to frame | mm | 270 | |
Distance between top and bottom die | mm | 265 | |
Number of blows per minute | min-1 | 230 | |
Dimension of top to bottom | mm | 120*50 | |
Diameter of the working cylinder | mm | 215 | |
Diameter of the compressing cylinder | mm | 220 | |
Travel distance of malleus | mm | 265 | |
Travel distance of plunger | mm | 140 | |
Forges | Round | mm | Φ68 |
Square | mm | 52 | |
Motor | Power | kw | 5.5 |
Rotate speed | rpm | 1440 | |
Outside Size | Length | mm | 1320 |
Width | mm | 670 | |
High | mm | 1620 | |
Anvil block weight | kg | 600 | |
Hammer weight | kg | ~1700 | |
QUALITY MEASURE
Quality assurance system
Company organizes the production as per ISO9001:2008 standard. From design control, process control, inspection control to delivery, installed and service, the whole process control. The running of quality system performs quality manual, procedure files, work instruction and related technical and management standard together with standard and regulation layout by company strictly. Quality system realizes whole screw and whole procedure control completely.
MACHINE QUALITY
Machine design and manufacture performs occupation standard and comply with the requirement of quality, specification and characters herein this technical regulation.
Guarantee period start from the day the machine acceptance report signing. Period would be one year.
Technical documents which supplier in charge of furnish and handed to use should be consist with technical regulation, and throughout technical, technics, produce, installation and setting
After-sale-service
Manufacturer(my company) will in charge of the technical service for the whole using life of the machine.
If you want to know more about the machine ,pls. contact with us freely.
PICTURES DISPLAY
