Specifications
Rolling ball screw from GermanyOne set of Orginal Type3 which is suitable for make any files
2.2KW spindle
Square Rail
CE
| MODEL | SD1208 CNC ROUTER | |
| NO. | Description | Parameter |
| 1 | X,Y,Z Working Area | 1200*800*90MM |
| 2 | Table Size | 1300*1000mm |
| 3 | X,Y,Z Traveling Positioning Accuracy | ±0.03/300mm |
| 4 | X,Y,Z repositioning Positioning Accuracy | ±0.02mm |
| 5 | Lathe Structure | intergral steel frame ,Y axis upgrade into TAIWAN LINEAR RAIL |
| 6 | X Structure | Ball Screw with linear rail |
| 7 | Y Structure | Ball Screw with linear rail |
| 8 | Z Structure | Ball Screw, Shaft Bearings |
| 9 | Max.Consume power | 3.0Kw |
| 10 | Max.Speed | 0-8000mm/min |
| 11 | Max.Working Speed | 0-6000mm/min |
| 12 | Spindle Power Motor | 2.2kw spindle cooled by water ---manual change tools |
| 13 | tools magazine | none |
| 14 | Spindle Speed | 0-24000RPM |
| 15 | Working Mode | Stepper motor |
| 16 | Working Voltage | 1 phase AC220V/50HZ/60Hz |
| 17 | Command Code | G code(*uoo,*nc,*mmg, *plt) |
| 18 | Operating System | DSP System ,128M control handle |
| 19 | Interface | Printer port 50pins or USB |
| 20 | system Memory | SUDA FPGA 4GB NC HANDLE SYSTEM |
| 21 | Collet | ER20(Φ3.175, Φ6) |
| 22 | X,Y Working Delicacy | <0.01mm |
| 23 | Software | Type3 software orignal from France |
| 24 | Running circumstance | Temperature: 0°C~45°C Relative humidity: 30%~75% |
| 25 | Packing Size | 1370*1730*1650mm |
| 26 | Net Weight | 560 |
| 27 | Gross Weight | 460 |
| Suitable Materials | ||
| Wood, Plastic, Aluminium, Di-Bond, Engraving Board, Fomex.Engineering plastics, marble, acrylic, perspex, PVC, Composite panel, Copper, Alloys, MDF, etc. | ||
